Re: [nv-l] Restoring an nvhotbackup to another system

[Mike Pearson <pearsom@us.ibm.com>]

Mike:
        The
255 error message for ovtopmd is because of the env not being properly
sourced.  Did you start netview with either /etc/netnmrc or netview?
 The sourcing should be in netnmrc.

Regards, 
Michael Pearson

Tivoli NetView for UNIX and NT Support
Building 660, Office  CC105B;
HWY. 54 & 600 PARK OFFICES DR
Research Triangle Park, N.C. 27709
(919) 254-2270
pearsom@us.ibm.com
******************************************************************

******************************************************************
Need help with Tivoli Software Products? 
Ask Tivoli! 
http://www.tivoli.com/asktivoli

mikemillion2000@comcast.net
Sent by: owner-nv-l@lists.us.ibm.com

06/02/2006 11:39 AM

Please respond to
nv-l@lists.us.ibm.com

To	nv-l@lists.us.ibm.com
cc
Subject	Re: [nv-l] Restoring an nvhotbackup to another system

Frank-
 
Yes, the 7.1.4 system was operational before I restored
the databases.  However, you may have something here:
 
root@connm10:/usr/OV/bin>./ovtopmd
         
exec(): 0509-036 Cannot load program ./ovtopmd because of the following
errors:
        0509-150   Dependent module librim.a(shr.o)
could not be loaded.
        0509-022 Cannot load module librim.a(shr.o).
        0509-026 System error: A file or directory
in the path name does not exist.
root@connm10:/usr/OV/bin>
 
-------------- Original message -------------- 
From: George deSocio <desocio@us.ibm.com> 

Mike, did your 7.1.4 system ever work?  Did ovtopmd ever start?
Run ovtopmd in the foreground.  That is, from the command line: 
/usr/OV/bin/ovtopmd 
Post the resulting messages. 

Regards,
Geo.

George deSocio
IBM Americas Support - Distributed Network Management

E-Mail:  desocio@us.ibm.com

mikemillion2000@comcast.net
Sent by: owner-nv-l@lists.us.ibm.com

06/02/2006 09:08 AM

Please respond to
nv-l@lists.us.ibm.com

To	nv-l@lists.us.ibm.com, nv-l@lists.us.ibm.com
cc	mikemillion2000@comcast.net
Subject	[nv-l] Restoring an nvhotbackup to another system

Noted that I did not revise the subject header, so I'm just re-posting
this, as I would appreciate any suggestions/help. 
  
Thanx. 
  
Mikemillion 
  
-------------- Original message -------------- 
From: mikemillion2000@comcast.net 
Working on recoving an nvhotbackup from one server (7.1.3) to another server
(7.1.4).  Here is what I ran into when I ran the reset_ci: 
  
root@connm10:/usr/OV/service>./reset_ci

Start of reset_ci, after successful completion
you will receive a reset_ci finished message.


Reregistering /u! sr/OV/l rf/ovesmd.lrf...
ovaddobj - Static Registration Utility
Successful Completion

Reregistering /usr/OV/lrf/ovelmd.lrf...
ovaddobj - Static Registration Utility
Successful Completion

./reset_ci[253]: objcall:  not found.
Unable to update the label for the NetView server icon.

reset_ci finished 
Then when I tried to start the daemons, here is what resulted: 
  
root@connm10:/usr/OV/service>/etc/netnmrc
portmap is already running 
Starting IBM Tivoli NetView daemons : 
WARNING: Daemon startup error.  See /usr/OV/tmp/netnmrc.ovstart
root@connm10:/usr/OV/service>
   
root@connm10:/usr/OV/service>cat
/usr/OV/tmp/netnmrc.ovstart
object manager name: OVsPMD
behavior:            OVs_PMD
state:               RUNNING
PID:                 50550
exit status:         -

object mana! ! ger n am e: nvsecd
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:                 45610
last message:        Initialization complete.
exit status:         -

object manager name: pmd
behavior:            OVs_WELL_BEHAVED
state:    ! ;   ;         RUNNING
PID:                 22990
last message:        pmd completed initialization
exit status:&nb! sp;! &n bsp;& nbsp;      -

object manager name: nvpagerd
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:                 5702
last message:        PMD initialization complete
exit status:         -

object manager name: nvlockd
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:                 20318
last message: !  & amp;nbs! p;  ;    Init: Success
exit status:         -
obje ct manager name: nvlockd
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:                 20318
last message:        Initialization complete.
exit status:         -

object manager name: OVORS_M
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:         &nbs! p;  ; &nbs! p;  ;
  17292
last message:        orsd completed initialization
exit status:         -

object manager name: mgragentd
behavior:            OVs_NON_WELL_BEHAVED
state:               RUNNING
PID:                 66798
exi! t statu s:         -

object manager name: trapgend
behavior:            OVs_NON_WELL_BEHAVED
state:               RUNNING
PID:        !  & nbsp;  &n! bsp;&nb
sp;   42102
exit status:         -

object manager name: snmpserver
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:                 66264
last message:        Initialization complete
exit status:         -

object manager name: trapd
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:        &nb! sp;&nbs p;    &nbs!
p;  ; 11394last message:        Initialization
complete.
exit status:         -

object manager name: nvcorrd
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:                 19436
last message:        Initialization complete
exit status:         -

object manager name: actionsvr
behavior:            OVs_WELL_BEHAVED
state:            !  & nbsp; RUNNING
PID:  ! ;                37946
last message:        Initialization complete
exit status:         -

object manager name: ovwdb
behavior:            OVs_WELL_BEHAVED
state:         !       RUNNING
PID:                 25212
last message:        Initialization complete.
exit status:         -

object manager name: nvserverd
behavior:            OVs_WELL_BEHAVED
! ;state:        !  & nbsp;    
 RUNNING
PID:                 38302
last message:        Initialization complete.
exit status:         -

object manager name: nvcold
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:                 73470
last message:        Initialization complete.
exit status:         -

object manager name: servmon
beh! avior: &nbs! p;  ;        ! OVs_WE LL_BEHAVED
state:               RUNNING
PID:                 29530
last message:        Initialization complete
exit status:         -

object manager name: webserver
behavior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:                 17662
last message:        Initialization complete
exit status:         ! -
&n bsp;
object manager name: ovactiond
&nb! sp;beha vior:            OVs_WELL_BEHAVED
state:               RUNNING
PID:                 58782
last message:       !  I nitialization complete.
exit status:         -

object manager name: ovtopmd
behavior:            OVs_WELL_BEHAVED
state:               NOT_RUNNING
PID:                 68860
last message:     &n! bsp;&nb sp; 
exit status:     &n! bsp;&nb sp;  exit(255)

object manager name: snmpCollect
behavior:            OVs_WELL_BEHAVED
state:               UNSTARTABLE
PID:                 (never run)
last message:        
exit status:         -

object manager name: itsl2
behavior:            OVs_WELL_BEHAVED
state:               UNSTARTABLE
PID: &n! bsp; &n bsp;           &nbs!
p; (nev er run)
last message:      &nb! sp; 
exit status:         -

object manager name: netmon
behavior:            OVs_WELL_BEHAVED
state:               UNSTARTABLE
PID:                 (never run)
last message:        
exit status:         -

object manager name: ems_sieve_agent
behavior:            OVs_WELL_BEHAVED
state:               UNSTARTABLE
PID:     &nb! sp;&nbs p;        
 (never run)
&nb! sp;last message:        
exit status:         -

object manager name: ems_log_agent
behavior:            OVs_W! ELL_BEH AVED
state:               UNSTARTABLE
PID:                 (never run)
last message:        
exit status:         - 
As you can see, I'm having daemon startup issues.  Any suggestions/takers?
  
Thanx. 
  
Mikemillion