|
did you disable autodicovery or use a seedfile ?
--
fredo
> -----Original Message-----
> From: Liu, David [mailto:david.liu@eds.com]
> Sent: Wednesday, July 19, 2006 3:01 PM
> To: Tivoli NetView Discussions
> Subject: RE: [NV-L] Demandpoll Problems
>
>
> James,
>
> Thanks for your quick reply.
>
> Forgot to mention, for new devices (automatically discovery doesn't
> work, only loadhosts), they are in non-snmp smartset. For old devices,
> they are snmp supported. And all devices can be snmpwalk-ed from the
> command line (with default community string). MIB browser is also
> working fine for all devices.
>
> Regards,
> David
>
> -----Original Message-----
> From: nv-l-bounces@lists.ca.ibm.com
> [mailto:nv-l-bounces@lists.ca.ibm.com] On Behalf Of James Shanks
> Sent: Wednesday, July 19, 2006 2:55 PM
> To: Tivoli NetView Discussions
> Subject: Re: [NV-L] Demandpoll Problems
>
> Right click the device you are demandpolling and look at the object
> properties. Does it say it is SNMP Supported?
> If so, then can you snmpwalk it? Don't specify a community name,
> just
> do "/usr/OV/bin/snmpwalk <hostname> system"
> If that does not work, then your xnmsnmpconf has the wrong community
> name or the agent on the box is no longer responding.
>
> James Shanks
> Level 3 Support for Tivoli NetView for UNIX and Windows
> Tivoli Software
> / IBM Software Group
>
>
>
>
> "Liu, David"
>
> <david.liu@eds.co
>
> m>
> To
> Sent by: "Tivoli NetView Discussions"
>
> nv-l-bounces@list <nv-l@lists.ca.ibm.com>
>
> s.ca.ibm.com
> cc
>
>
>
> Subject
> 07/19/2006 08:21 [NV-L] Demandpoll Problems
>
> AM
>
>
>
>
>
> Please respond to
>
> Tivoli NetView
>
> Discussions
>
> <nv-l@lists.ca.ib
>
> m.com>
>
>
>
>
>
>
>
>
>
> Dear list,
>
> NV714, FP3, Solaris .
>
> Last week I posted a question regarding demandpoll problem
> (discovery).
> It was finally found that demoandpoll is not doing his job for all
> devices, not only for the discovery. When I issue demandpoll
> (from both
> GUI and command line), it only gives back the status of the interfaces
> and verify node name. No more checking interface table, arp cache,
> admin/oper status etc. as before. I did ovtopofix -A (brook after two
> hours) before that happened. Later I did ovtopofix with all
> the options
> individually (not the -A), it finished in half a hour.
> But demandpoll is still not doing.
>
> Could someone help? Thank you in advance.
>
> Regards,
> David
> _______________________________________________
> NV-L mailing list
> NV-L@lists.ca.ibm.com
> Unsubscribe:NV-L-leave@lists.ca.ibm.com
> http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access
> limited to
> internal IBM'ers only)
>
>
> _______________________________________________
> NV-L mailing list
> NV-L@lists.ca.ibm.com
> Unsubscribe:NV-L-leave@lists.ca.ibm.com
> http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access
> limited to
> internal IBM'ers only)
>
> _______________________________________________
> NV-L mailing list
> NV-L@lists.ca.ibm.com
> Unsubscribe:NV-L-leave@lists.ca.ibm.com
> http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access
> limited to internal IBM'ers only)
>
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|