Yes I have been doing that. It looks like we are going a different
direction with the solution for this. I will revisit NV rules as I want to
learn this. Thanks for everyone's help.
Sean Lawrence
Systems Automation
Ext 5728
Greg Keetch <gkeetch@ca.ibm.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
10/24/2006 12:01 PM
Please respond to Tivoli NetView Discussions
To: Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
cc:
Subject: Re: [NV-L] Ruleset Editing Questions
Sean,
This may seem like a silly question, but did you remember to do a 'nvtecia
-reload' after you updated the Enterprise ID in the ruleset? Sorry, I had
meant to ask this last time since it's easy to forget to do.
Regards,
Greg Keetch
IT Specialist (Advisor), Network Services
Network Management Tools Specialist
Information Technology Services Americas (ITSA), Global Services, IBM
Canada
sean.lawrence@can
tire.com
Sent by: To
nv-l-bounces@list Tivoli NetView Discussions
s.ca.ibm.com <nv-l@lists.ca.ibm.com>
cc
10/24/2006 08:48 Subject
AM Re: [NV-L] Ruleset Editing
Questions
Please respond to
Tivoli NetView
Discussions
<nv-l@lists.ca.ib
m.com>
My config is correct in the rules editor. But the output of nvcdebug -n is
different.
Looks like the Cisco guys might have solved our flooding problem.
I still want to get this working for my own sanity though.
Sean Lawrence
Systems Automation
Ext 5728
Greg Keetch <gkeetch@ca.ibm.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
10/24/2006 11:27 AM
Please respond to Tivoli NetView Discussions
To: Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
cc:
Subject: Re: [NV-L] Ruleset Editing Questions
I saw in another response from you that you removed the leading '.' from
the enterprise ID in your ruleset... This output shows that it's still
there. Has there been any change since you removed it?
Regards,
Greg Keetch
IT Specialist (Advisor), Network Services
Network Management Tools Specialist
Information Technology Services Americas (ITSA), Global Services, IBM
Canada
sean.lawrence@can
tire.com
Sent by: To
nv-l-bounces@list Tivoli NetView Discussions
s.ca.ibm.com <nv-l@lists.ca.ibm.com>
cc
10/24/2006 08:09 Subject
AM Re: [NV-L] Ruleset Editing
Questions
Please respond to
Tivoli NetView
Discussions
<nv-l@lists.ca.ib
m.com>
Ok maybe someone can explain what I am seeing here. Why am I still getting
a 1.3.6.1.4.1.9.1.400 trap forwarded to TEC?
2006/24/10 09:46:38 CorrelationDef.C[562] : Current running
correlation:
CorrelationDefinition(0x30033b08)
+ RootDnode
+ + RuleSet forwardall.rs
+ + + Forward(19) Corrnode application=0x303d2888
+ + RuleSet test.rs
+ + + EventAttributes (Attr='EnterpriseID' ne
Value='.1.3.6.1.4.1.9.1.400')
+ + + + EventAttributes (Attr='Origin' ne Value='42.231.8.3')
+ + + + + EventAttributes (Attr='Origin' ne Value='42.2.1.12')
+ + + + + + EventAttributes (Attr='Origin' ne Value='42.2.1.13')
+ + + + + + + EventAttributes (Attr='Origin' ne Value='0.0.0.0')
+ + + + + + + + Forward(130) Corrnode application=0x30062d18
2006/24/10 10:35:24 .//nl_nvcorrd.C[634] : ===> Received a Trap
2006/24/10 10:35:24 EventData.C[110] :
Attr(EnterpriseID='(char,1.3.6.1.4.1.9.1.400)')
2006/24/10 10:35:24 EventData.C[121] : Attr(Generic='(ulong,2)')
2006/24/10 10:35:24 EventData.C[128] : Attr(Specific='0')
2006/24/10 10:35:24 EventData.C[233] : Received event CID(60206)
sysOID(1.3.6.1.4.1.9.1.400) Gen(2) Spec(0)
2006/24/10 10:35:24 .//nl_nvcorrd.C[721] : ===> Processing Event
=========================== 1 of 1
Event CID(60206) 10:35:24
Attr(EnterpriseID='(char,1.3.6.1.4.1.9.1.400)')
Attr(Generic='(ulong,2)')
Attr(Specific='0')
2006/24/10 10:35:24 BaseDnodes.C[598] :
RootDnode::resolveRootDnode() = TRUE
2006/24/10 10:35:24 BaseDnodes.C[699] : RuleSet::resolve()
RuleSetName =forwardall.rs
2006/24/10 10:35:24 CorrDnodes.C[1111] : Forward::resolve()
queueing event for forwaring:Event(CID(60206), Attr(E
2006/24/10 10:35:24 BaseDnodes.C[699] : RuleSet::resolve()
RuleSetName =test.rs
2006/24/10 10:35:24 EventAttrDnode.C[101] :
EventAttributes::resolve(EventAttrDnode(Attr:EnterpriseID ne .1.3.6.1.4.
2006/24/10 10:35:24 EventData.C[121] :
Attr(Origin='(ulong,711727166)')
2006/24/10 10:35:24 EventData.C[121] :
Attr(sysUpTime='(ulong,3730356673)')
2006/24/10 10:35:24 EventData.C[110] :
Attr(Community='(char,public)')
2006/24/10 10:35:24 EventData.C[669] : Event CID=CID(60206)
Attributes
2006/24/10 10:35:24 EventData.C[670] : agentAddress=711727166
sysUpTime=3730356673 Community=public
2006/24/10 10:35:24 EventData.C[110] : Attr(1='(char,64)')
2006/24/10 10:35:24 EventData.C[110] :
Attr(2='(char,GigabitEthernet10/10)')
2006/24/10 10:35:24 EventData.C[110] : Attr(3='(char,6)')
2006/24/10 10:35:24 EventData.C[110] : Attr(4='(char,Lost
Carrier)')
2006/24/10 10:35:24 EventData.C[121] : Attr(Category='(ulong,3)')
2006/24/10 10:35:24 EventData.C[110] : Attr(Source='(char,A)')
2006/24/10 10:35:24 EventData.C[121] : Attr(Severity='(ulong,1)')
2006/24/10 10:35:24 EventAttrDnode.C[101] :
EventAttributes::resolve(EventAttrDnode(Attr:Origin ne 42.231.8.3)) = TR
2006/24/10 10:35:24 EventAttrDnode.C[101] :
EventAttributes::resolve(EventAttrDnode(Attr:Origin ne 42.2.1.12)) = TRU
2006/24/10 10:35:24 EventAttrDnode.C[101] :
EventAttributes::resolve(EventAttrDnode(Attr:Origin ne 42.2.1.13)) = TRU
2006/24/10 10:35:24 EventAttrDnode.C[101] :
EventAttributes::resolve(EventAttrDnode(Attr:Origin ne 0.0.0.0)) = TRUE
2006/24/10 10:35:24 CorrDnodes.C[1111] : Forward::resolve()
queueing event for forwaring:Event(CID(60206), Attr(E
2006/24/10 10:35:24 EventAttrDnode.C[105] :
EventAttributes::resolve(EventAttrDnode(Attr:EnterpriseID eq 1.3.6.1.4.1
2006/24/10 10:35:24 EventAttrDnode.C[105] :
EventAttributes::resolve(EventAttrDnode(Attr:EnterpriseID eq 1.3.6.1.4.1
2006/24/10 10:35:24 CorrDnodes.C[230] : ===> Processing actions
for forwardall.rs
2006/24/10 10:35:24 CorrDnodes.C[772] : combining Action with
empty ForwardCorrAction
2006/24/10 10:35:24 CorrDnodes.C[391] : Forward notification to
appl(86080, forwardall.rs, Active) CID(60206) S
2006/24/10 10:35:24 CorrDnodes.C[419] : forwarding EventInst:
Event CID(60206) 10:35:24
Attr(EnterpriseID='(char,1.3.6.1.4.1.9.1.400)')
Attr(Generic='(ulong,2)')
Attr(Specific='0')
Attr(Origin='(ulong,711727166)')
Attr(sysUpTime='(ulong,3730356673)')
Attr(Community='(char,public)')
Attr(1='(char,64)')
Attr(2='(char,GigabitEthernet10/10)')
Attr(3='(char,6)')
Attr(4='(char,Lost
Carrier)')
Attr(Category='(ulong,3)')
Attr(Source='(char,A)')
Attr(Severity='(ulong,1)')
2006/24/10 10:35:24 CorrDnodes.C[524] : Forwarding buffer.
cid=60206 length=148 buffer=0x304104d8
2006/24/10 10:35:24 CorrDnodes.C[526] : severity=99
status=99 causingCID=0 causedCID=0 primeTime=0
2006/24/10 10:35:24 CorrDnodes.C[277] : ===> Completed actions for
forwardall.rs forwards=1 overrides=0 resolves
2006/24/10 10:35:24 CorrDnodes.C[230] : ===> Processing actions
for test.rs
2006/24/10 10:35:24 CorrDnodes.C[772] : combining Action with
empty ForwardCorrAction
2006/24/10 10:35:24 CorrDnodes.C[391] : Forward notification to
appl(86080, test.rs, Active) CID(60206) SEV(99)
2006/24/10 10:35:24 CorrDnodes.C[419] : forwarding EventInst:
Event CID(60206) 10:35:24
Attr(EnterpriseID='(char,1.3.6.1.4.1.9.1.400)')
Attr(Generic='(ulong,2)')
Attr(Specific='0')
Attr(Origin='(ulong,711727166)')
Attr(sysUpTime='(ulong,3730356673)')
Attr(Community='(char,public)')
Attr(1='(char,64)')
Attr(2='(char,GigabitEthernet10/10)')
Attr(3='(char,6)')
Attr(4='(char,Lost
Carrier)')
Attr(Category='(ulong,3)')
Attr(Source='(char,A)')
Attr(Severity='(ulong,1)')
2006/24/10 10:35:24 CorrDnodes.C[524] : Forwarding buffer.
cid=60206 length=148 buffer=0x304104d8
2006/24/10 10:35:24 CorrDnodes.C[526] : severity=99
status=99 causingCID=0 causedCID=0 primeTime=0
2006/24/10 10:35:24 CorrDnodes.C[277] : ===> Completed actions for
test.rs forwards=1 overrides=0 resolves=0
2006/24/10 10:35:24 .//nl_nvcorrd.C[745] : ===> Finished with the
trap ====================================
Sean Lawrence
Systems Automation
Ext 5728
Greg Keetch <gkeetch@ca.ibm.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
10/24/2006 10:25 AM
Please respond to Tivoli NetView Discussions
To: Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
cc:
Subject: Re: [NV-L] Ruleset Editing Questions
Hello,
The forwardall.rs ruleset is used be default in the Event Display, so this
is where it is probably getting loaded. There is no relationship between
the rulesets that are used by ESE.automation, Event Display, or TEC
forwarding using tecint.conf. Each one has it's own destination for
forwarding events to, so the forwardall.rs in the Event Display will not
override what the ruleset in tecint.conf for TEC forwarding.
Regards,
Greg Keetch
IT Specialist (Advisor), Network Services
Network Management Tools Specialist
Information Technology Services Americas (ITSA), Global Services, IBM
Canada
sean.lawrence@can
tire.com
Sent by: To
nv-l-bounces@list Tivoli NetView Discussions
s.ca.ibm.com <nv-l@lists.ca.ibm.com>
cc
10/24/2006 06:56 Subject
AM Re: [NV-L] Ruleset Editing
Questions
Please respond to
Tivoli NetView
Discussions
<nv-l@lists.ca.ib
m.com>
Ok I ran the "nvcdebug -n" command. The output is as follows
2006/24/10 09:46:38 CorrelationDef.C[562] : Current running
correlation:
CorrelationDefinition(0x30033b08)
+ RootDnode
+ + RuleSet forwardall.rs
+ + + Forward(19) Corrnode application=0x303d2888
+ + RuleSet test.rs
+ + + EventAttributes (Attr='EnterpriseID' ne
Value='.1.3.6.1.4.1.9.1.502')
+ + + + EventAttributes (Attr='Origin' ne Value='42.231.8.3')
+ + + + + EventAttributes (Attr='Origin' ne Value='42.2.1.12')
+ + + + + + EventAttributes (Attr='Origin' ne Value='42.2.1.13')
+ + + + + + + EventAttributes (Attr='Origin' ne Value='0.0.0.0')
+ + + + + + + + Forward(130) Corrnode application=0x30062d18
I do not know why the forwardall.rs is being loaded. The ESE.automation
file is as follows
#This file should contain a list of filenames
#that will be autmatically started by actionsvr.
#Each rule set name is on a separate line; the pund sign
#indicates a comment line.
#An example line, with the name commented out) is below:
#your_ruleset_here.rs
Am I correct in assuming that the forwardall.rs is forwarding everything
before the test.rs even gets a look at it?
Sean Lawrence
Systems Automation
Ext 5728
James Shanks <jshanks@us.ibm.com>
Sent by: nv-l-bounces@lists.ca.ibm.com
10/24/2006 09:16 AM
Please respond to Tivoli NetView Discussions
To: Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
cc:
Subject: Re: [NV-L] Ruleset Editing Questions
If you use xnmtrap and set the trap to "Log Only" It will not be sent to
TEC nor display in your event windows but it will be kept in trapd.log so
that you can gauge how many you are getting. You can also set the trapd to
"Don't Log or Display" and this will keep it from the log as well, but
then you'll have no way of knowing what's going on if start having a
performance problem because too many of these traps are arriving.
Cisco devices are highly configurable. You usually can configure just the
traps you want and even the frequency that they are sent. Perhaps you
should talk to your network guys about that and solve the problem at the
source. Remember that getting a lot of unwanted traps isn't just a
nuisance. It's a performance issue, not just for NetView, but for everyone
else on the same subnet. That's their potential bandwidth you are eating
and throwing away.
As for your ruleset, I'm not sure what it is supposed to say. Greater than
or less than the OID? Why not just "not equal to" ?
But in any case you can tell exactly what ruleset you are running in two
ways. If you are keeping an nvserverd.log, then the name will be in there,
as will evidence of the reload. But whether you are or are not keeping the
nvserverd.log, you can issue "nvcdebug -n" which will cause nvcorrd to
write out in detail to his log what rulesets he is running. You can see
the contents of the ruleset there. You can also debug this way by sending
"nvcdebug -d all" and then observing what happens to each event as it is
evaluated. Everything between the eyecatcher "Received a trap" and
"Finished with the event" is nvcorrd processing that event.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp
sean.lawrence@cantire.com
sean.lawrence@cantire.com
Sent by: nv-l-bounces@lists.ca.ibm.com
10/24/2006 08:13 AM
Please respond to
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
To
Tivoli NetView Discussions <nv-l@lists.ca.ibm.com>
cc
Subject
[NV-L] Ruleset Editing Questions
I am trying to set up some rules to filter out traps coming for
Ciscoworks. We are getting way to many now that the network guys have
turned it on.
Is there a way to simply drop traps that have not been defined in the
trapd.conf? I do not want to keep them in Netview or forward them to TEC.
On a side note I am having trouble setting up simple rules.
I am receiving a trap from Ciscoworks with the OID of 1.3.6.1.4.1.9.1.502
I do not want this forwarded to TEC
In the ruleset defined in tecint.conf I created an Event Attributes rule.
It looks like this:
Event Stream -> (EnterpriseOID <> 1.3.6.1.4.1.9.1.502) -> Forward
I ran the nvtecia -reload command to reload the ruleset and I am still
getting these forwarded. Is there something else required to load modified
rulesets?
Sean
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
*** eSafe scanned this email for malicious content ***
*** IMPORTANT: Do not open attachments from unrecognized senders ***
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|