Re: [NV-L] Incorrect bandwidth data above 100MB

[John M Gatrell <John.Gatrell@uk.ibm.com>]

Yes, I'm seeing something similar. I'm
running on AIX NetView 715 Fixpack3. 
The graphs did not look right for me
when I started monitoring a router with a Gigabit interface and a Bandwidth
200000 (200 Mbit)
statement. The previous router, which
had a bandwidth 100000 statement, was graphed correctly.

I'm using an entry in mibExpr.conf namely
BandwidthUtilOut \
"8*100* ifOutOctets / ifSpeed"
\
        .1.3.6.1.2.1.2.2.1.16.
\
        .1.3.6.1.2.1.2.2.1.5.
/ \
        800 *

I tried dividing the ifSpeed by 800
first and this gave more believable results.
Your mileage may vary. I tried using:

NewUtilOut \
"ifOutOctets/(ifSpeed/800)"
\
        .1.3.6.1.2.1.2.2.1.16.
\
        .1.3.6.1.2.1.2.2.1.5.
\
        800 / /

John Gatrell

---

Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number 741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU

_______________________________________________
NV-L mailing list
NV-L@lists.ca.ibm.com
Unsubscribe:NV-L-leave@lists.ca.ibm.com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to 
internal IBM'ers only)