nv-l
[Top] [All Lists]

Antwort: NetView Machine Hung after installing CiscoWorks 3.0.3

To: nv-l@lists.tivoli.com
Subject: Antwort: NetView Machine Hung after installing CiscoWorks 3.0.3
From: Juergen Strittmatter <js@NEEF.DE>
Date: Fri, 17 Jul 1998 11:17:04 +0100
Reply-to: Discussion of IBM NetView and POLYCENTER Manager on NetView et alia <NV-L@UCSBVM.UCSB.EDU>
Sender: Discussion of IBM NetView and POLYCENTER Manager on NetView et alia <NV-L@UCSBVM.UCSB.EDU>
Hi,

I had the same problem after installing CiscoWorks 3.0.3.

By default CiscoWorks Processes are started in /etc/rc thats before the
start of the NetView processes. Move the lines in this file that concerning
CiscoView to the file /etc/rc.tcpip behind the line /etc/netnmrc that
starts NetView processes.

The installation skript doesn't configure NetView database fields and
bitmaps correctly. so execute the following commands manually:

nv6000 -fields
nv6000 -config
nv6000 -verify

Don't forget to add execution of /usr/nms/install/install.kshrc to the
user's profile.The error messages in the startup of CiscoWorks still remain
but can be ignored.

Hope this helps





rozi-ai abd-rahman <roziai@HOTMAIL.COM> am 17.07.98 08:36:51

Bitte antworten an Discussion of IBM NetView and POLYCENTER Manager on
      NetView et alia <NV-L@UCSBVM.UCSB.EDU>
                                                              
                                                              
                                                              
 An:      NV-L@UCSBVM.UCSB.EDU                                
                                                              
 Kopie:   (Blindkopie: Jürgen Strittmatter/Infra CS)          
                                                              
                                                              
                                                              
 Thema:   NetView Machine Hung after installing CiscoWorks    
          3.0.3                                               
                                                              






Hi Forum readers, I finally managed to install NV 4 on 41T. My box has
128 MB 3GB AIX 4.1.5 with june 98 fixes. My NetView is 4.1.1 with
U451880 installed. My NetView works fine and Installation of CiscoWorks
3.0.3 looks ok. After CiscoWorks installation I managed to run commands
like CiscoView (on cisco hw)..and a few other commands.
However when I reboot my Machine, My machine hang and the following
error messages displayed
strload:cannot initialize stddev: Do not specify existing file
strload:spx already loaded
strload:sc already loaded
ERROR : Unable to load poartable Stream Environment,Please check the
/usr/sbin/strload program. This utility is required fo rth Sybase
dataserver
SERVER cw_SYBASE successfully started on nms
starting the application "nmpolld"
"nmpolld" successfully started on nms
starting the application nmlogd
nmlogd successfully started on nms
all administrative ....successfully started on nms
I also configured  CiscoWorks product and Sybase for Ciscoworks. I did
not configure TACACS server and CiscoConnect since they are optional and
my installtion failed when I installed that. (reistall fresh all after
that)
When my mahine hang it seems like none of the NetView processors/demons
started yet.It seems like cisco's processors are started before anything
else. I am not sure what is happenning.
Has anybody get this Error before. I will also be installing Transcend
Enterprise Manager on this same machine..Is there anything that I need
to know.
Thanks for your kind  help
ai@mesiniaga.com.my, roziai@hotmail.com
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com


Mit freundlichen Grüßen

Jürgen Strittmatter / js , GS KA
Neef Elektrotechnik GmbH & Co.
Systemhaus für Gebäude- und Kommunikationstechnik
Unternehmen der Sulzer Infra
Windeckstrasse 9      76135 Karlsruhe
Tel: 0721/8606-233
E-Mail/Internet: Juergen_Strittmatter @neef.de
Notes: Jürgen Strittmatter/Infra CS @SULZERINFRA

<Prev in Thread] Current Thread [Next in Thread>
  • Antwort: NetView Machine Hung after installing CiscoWorks 3.0.3, Juergen Strittmatter <=

Archive operated by Skills 1st Ltd

See also: The NetView Web