Ibrahim, check file /usr/OV/log/snmpCol.trace for information on your
problem may be.
Blaine Owens
bowens@eastman.com
> -----Original Message-----
> From: ibrahim@POLARIS.COM.TR [SMTP:ibrahim@POLARIS.COM.TR]
> Sent: Wednesday, July 29, 1998 11:24 AM
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Data collection problem...
>
> Hi all,
> We are using Netview V5-AIX on AIX4.3.
> When I setup a data collection to get line utilization on a router, I
> use
> the following expression in the file mibExpr.conf .
>
> BandwidthUtilHdx \
> "8*100*(ifInOctets+ifOutOctets) / ifSpeed" \
> .1.3.6.1.2.1.2.2.1.10. \
> .1.3.6.1.2.1.2.2.1.16. +\
> .1.3.6.1.2.1.2.2.1.5. / \
> 800 *
>
> In the MIB data collection / Add collection to BandwidthUtilHdx
> window,
> I add the IP address of the router to list of collection sources.
> I choose the collection mode= Store, No thresholds,
> polling interval = 1m,
> Instances = All
>
> After I pressed the OK button, I see that In the MIB Object Collection
> Summary section,
>
> Interval =1m , Store=yes, Threshold= - Source= Ip
> address of the router Instances= All
> Source : IP address of the router ,
>
> After that I press Apply button. Now, I see the status of
> BandwidthUtilHdx
> is collecting.
>
> Waiting for about 30 min. for data collection, I press the Show Data
> button
> to see the collected data.
> An empty MIB data collection/Show data window appears. In this
> situation, there is no response from the Show Data screen.
> I only get rid of this window by killing its process.
>
> Is there anybody who knows/experiences this problem?
>
> Note : The ethernet segment and the router is very low loaded, and
> snmpCollect deamon is running and well-behaved.
>
> Best Regards
> Ibrahim Aykol
> Polaris Computer Systems & Consultancy Ltd.
|