nv-l
[Top] [All Lists]

Re: Ciscoworks Pathtool doesn't work with NV5

To: nv-l@lists.tivoli.com
Subject: Re: Ciscoworks Pathtool doesn't work with NV5
From: Scott Wilson <swilson@RPM.COM>
Date: Fri, 28 Aug 1998 09:06:30 -0400
Organization: RPM Consulting
Reply-to: swilson@rpm.com
Sender: Discussion of IBM NetView and POLYCENTER Manager on NetView et alia <NV-L@UCSBVM.UCSB.EDU>
There is a patch available for this and I have verified that it does work.
The following is in response to a TAC item that I had with Cisco recently
(you will of course need a CCO account):

Problem with nmpath. The resolution to that is as follows..

+++
  I have found information about this issue. It has been reported as a bug
of CiscoWorks, the bug id is CSCdj91490. The patch for this one can be
downloaded from
ftp://<userid>@www.cisco.com/cisco/netmgmt/ciscoworks/4.0/temp-smu/rtyzqk/,

the patch name is CSCdj91490.tar.Z. Please apply this patch to your system
to see if this will solve the problem. Please refer to README file for
instruction of installation.

+++



Carsten Strahler wrote:

> Hi,
>
> after migration from NV 4 to NV5 the Ciscoworks- Pathtool doesn't work.
> Is there a bugfix or a workaround available ?
>
> Carsten Strahler



--
-----------------------------------------------------------
Scott Wilson                         Email: swilson@rpm.com
Network Management Consultant        Pager: 800-506-7348
RPM Consulting, Inc.
-----------------------------------------------------------

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web