Hi there,
This fixed the problem. It was a series of files.
Thanx a million.
Regards
Mogamat
Giuliotti, J. P. wrote:
> I was (AIX 4.2.1 NV 4.1) able to fix this problem by recompiling the bitmap
> files on my machine.
>
> Type: ovw -config > /tmp/ovconf.out --(I'm not sure if you have to be in
> the bitmap directory or not)
>
> The ovconf.out file will show you the output of your compilation. This will
> tell you if one bitmap failed. None failed when I did it but it did stop the
> problem from happening again.
>
> -----Original Message-----
> From: Rob Rinear [SMTP:robr@DIRIGO.COM]
> Sent: Friday, September 18, 1998 3:30 PM
> To: NV-L@UCSBVM.UCSB.EDU
> Subject: Re: Error message on startup
>
> Basically, there is a corrupt or zero length bitmap file in your
> bitmaps
> directory. If you are particularly interested in Optivity, I've
> installed
> v8.1 twice recently and got this problem...turns out that the file
> baynet_baystack-150.38.m file is missing (the corresponding .p file
> is
> there). I simply copied the baynet...250.38.m file to 150.38.m and
> all
> seems well.
>
> -----Original Message-----
> From: Discussion of IBM NetView and POLYCENTER Manager on NetView et
> alia [mailto:NV-L@UCSBVM.UCSB.EDU]On Behalf Of Steven Valente
> Sent: Friday, September 18, 1998 11:57 AM
> To: NV-L@UCSBVM.UCSB.EDU
> Subject: Re: Error message on startup
>
> Hello,
>
> For those of us who do not have the guide handy, can someone please
> paraphrase this reference?
>
> Regards,
> Steve Valente
> Bay Networks
> Optivity Unix Support
>
> At 09:37 AM 9/18/98 +1000, Khaya Florida wrote:
> >check out netview v5 diagnosis guide pA-44.
> >
> >Florida...
> >
> >Florida Khaya
> >fkhaya@woolworths.com.au
> >Ph: 9843 1213
> >
> >> -----Original Message-----
> >> From: Mogamat Kahaar [SMTP:mogamat@SNSCON.CO.ZA]
> >> Sent: Friday, September 18, 1998 12:37 AM
> >> To: NV-L@UCSBVM.ucsb.edu
> >> Subject: Error message on startup
> >>
> >> Hi There,
> >>
> >> Every time I start up the netview GUI I get the following error
> messag:
> >>
> >> "Error during reading background file.
> >> Press OK."
> >>
> >> PS: I have checked the /nv6000.log file and it is empty. All
> Netview
> >> functionality is there. It's just that this message is extremely
> >> annoying.
> >>
> >> Please help ...
> >>
> >> Thanx a million in advance.
> >>
> >> Mogamat
|