Hello, Joe;
>From my experience if the TEC event does not have an emty or <none> hostname
>slot, then the submap
opened is the segment level submap of the open map with the node highlighted
(according to the trap
varbind 1). This works fine for me and only one submap of the map specified
gets opened.
If the slot is empty, for instance in OV_Network_Critical event, then there is
no requested_object
in the trap sent from TEC to NV as you can see in trapd.log. The trap is
.1.3.6.1.4.1.2.6.3 6
56179073 and is logged only. In this case I have seen that the node level
submap and the segment
level submap for my NV server are being opened.
Maybe James S. will shed more light on this issue.
HTH,
Best regards,
Vladimir.
"Prokott, Joe" wrote:
> Is it possible to control the specific NetView submap that opens when
> one
> chooses the "Event...NetView Submap..." option within T/EC after
> selecting a
> particular T/EC event (assuming TIPN has been installed within the
> NetView/TEC TMR)? I tried this option after selecting a T/EC event and
> 14
> separate submap windows opened all at once!!! I really don't want/need
> T/EC
> to open multiple NetView submaps. Ideally, only one NV submap would
> open;
> however, the question then is what submap will NetView choose if this is
> even possible? Can one "control" which *one* submap would open? Can
> one do
> this with minimal ongoing maintenance?
>
> I also noticed that this functionality only works under UNIX if one
> starts
> their T/EC console AND NetView console under the SAME display. How does
> this behave under NT if running NetView for NT? Does this also work if
> running a NetView for NT console and T/EC console under NT? Thanks in
> advance,
>
> Joe Prokott - West Group
> Network Architect
> 610 Opperman Drive
> St. Paul, MN 55123
> Phone: 651-687-4536
> Fax: 651-687-6946
> E-mail: joe.prokott@westgroup.com
--
Vladimir Petr
DATASYS
-----------------------------
PETR.vcf
Description: Card for Vladimir Petr
|