nv-l
[Top] [All Lists]

AW: Event...NetView Submap... option wit

To: nv-l@lists.tivoli.com
Subject: AW: Event...NetView Submap... option wit
From: Uwe Richter <Uwe.Richter@SYNTHESIS.DE>
Date: Fri, 18 Dec 1998 13:41:00 +0100
Reply-to: Discussion of IBM NetView and POLYCENTER Manager on NetView <NV-L@UCSBVM.UCSB.EDU>
Sender: Discussion of IBM NetView and POLYCENTER Manager on NetView <NV-L@UCSBVM.UCSB.EDU>
Hi Vladimir,

I have the same Problem with multiple open Submaps with
TEC-Event...NetView Submap..." option.
With a "normal" Node (one Interface) works it fine, but Routers the
dispsub-Funktion create multiple
Submaps.

regards
Uwe


 ----------
Von:  Vladimir Petr[SMTP:NV-L@UCSBVM.UCSB.EDU]
Gesendet:  Donnerstag, 17. Dezember 1998 11:55
An:  URICHTER; NV-L
Betreff:  RE: Event...NetView Submap... option wit

<<Datei: PETR.vcf>>

Original Subject:
RE: Event...NetView Submap... option within T/EC


Hello, Joe;

>From my experience if the TEC event does not have an emty or <none>
hostname
slot, then the submap
opened is the segment level submap of the open map with the node
highlighted
(according to the trap
varbind 1). This works fine for me and only one submap of the map
specified
gets opened.
If the slot is empty, for instance in OV_Network_Critical event, then
there
is no requested_object
in the trap sent from TEC to NV as you can see in trapd.log. The trap is
.1.3.6.1.4.1.2.6.3  6
56179073 and is logged only. In this case I have seen that the node level
submap and the segment
level submap for my NV server are being opened.

Maybe James S. will shed more light on this issue.

HTH,
Best regards,
Vladimir.

"Prokott, Joe" wrote:

> Is it possible to control the specific NetView submap that opens when
> one
> chooses the "Event...NetView Submap..." option within T/EC after
> selecting a
> particular T/EC event (assuming TIPN has been installed within the
> NetView/TEC TMR)?  I tried this option after selecting a T/EC event and
> 14
> separate submap windows opened all at once!!!  I really don't want/need
> T/EC
> to open multiple NetView submaps.  Ideally, only one NV submap would
> open;
> however, the question then is what submap will NetView choose if this
is
> even possible?  Can one "control" which *one* submap would open?  Can
> one do
> this with minimal ongoing maintenance?
>
> I also noticed that this functionality only works under UNIX if one
> starts
> their T/EC console AND NetView console under the SAME display.  How
does
> this behave under NT if running NetView for NT?  Does this also work if
> running a NetView for NT console and T/EC console under NT?  Thanks in
> advance,
>
> Joe Prokott - West Group
> Network Architect
> 610 Opperman Drive
> St. Paul, MN  55123
> Phone: 651-687-4536
> Fax: 651-687-6946
> E-mail: joe.prokott@westgroup.com

 --
Vladimir Petr
DATASYS
 -----------------------------

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web