Hi James,
I did what you advised an turned on the logging level in snmpd.conf to 3 on
the node where snmpd works wrong and on the node where snmpd works correct.
In the trace-output I can see on the defective node a line
simple {version 0, identify risc6000public.1.1, description "SNUX ATM
daemon",
password "muxatmd_password" }
After this command is listed the error-message
simpleOpen rejected (badIdentity): risc6000public.1.1
The above command does not exist on the good node.
The files snmpd.conf and snmpd.peer are the same on bothe nodes.
Best regards
Gerd
-----Ursprüngliche Nachricht-----
Von: James Shanks [mailto:James_Shanks@TIVOLI.COM]
Gesendet am: Mittwoch, 13. Januar 1999 15:48
An: NV-L@UCSBVM.UCSB.EDU
Betreff: Re: AuthenticationFailure
I am not certain that you have one problem. There may be several.
I would turn on the logging level in snmpd to 3 so you can get a trace of
all activity.
Trapgend is a SMUX peer, which requires entries in the snmpd.peers file to
match those in snmpd.conf, otherwise the open will be rejected with the
sort of message you see here. But I don't know how you could get a logon
from trapgend with a community name of "risc6000public.1.1" since it is
hard coded internally as "nv6000", so this looks like a failure from some
other process/daemon trying to open a connection to snmpd.
James Shanks
Tivoli (NetView for UNIX) L3 Support
"Brunschede, Gerd" <Gerd.Brunschede@HIK.FZK.DE> on 01/13/99 09:29:46 AM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: James Shanks)
Subject: AuthenticationFailure
Hi,
I have a strange problem and need some help.
We have four SP-Nodes with exactely the same /etc/snmpd.conf-file.
The same Community-Names are defined on the Nodes and the server.
On the Nodes I have started the trapgend und the snmpd.
Only on one node I get the Event-message
Incorrect Community Name (authenticationFailure Trap) public
If I look to the file /usr/tmp/snmpd.log I see the following message
EXEPTIONS: simpleOpen rejected (badIdentity): risc6000public.1.1 (SMUX
127.0.0.1.2230+6)
Where does this come from and how can I solve this problem?
Thanks in Advance
Gerd Brunschede
Forschungszentrum Karlsruhe GmbH
HIK
Hermann-von-Helmholtz-Platz 1
76344 Eggenstein-Leopoldshafen
Tel.: +49 7247 82-5637
Fax: +49 7247 82-4972
e-mail: gerd.brunschede@hik.fzk.de
|