The sfevents daemon starts automatically when you start the Netview GUI. If
no GUI ist started you didn't receive events from the 2220.
To see CMIP-events in your Control Desk you must acitvate the eventfilter
in the file /usr/OV/filters/Nways/EMS_Filters.
==> Control Desk - Options - Filter Control
Carsten Strahler
Michael Tsai <mictsai@TW.IBM.COM> on 01.02.99 18:27:49
Bitte antworten an Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.ucsb.edu>
An: NV-L@UCSBVM.ucsb.edu
Kopie: (Blindkopie: Carsten Strahler/nbg/DE)
Thema: Re: NetView Daemon did not running - sfevents
Thanks for your kindly reply for my inquiry of "sfevents daemon did not
running",
Yes, I have two sets of 2220 installed , I used NetView V5.0 and NBBS
V1.7.1 to
monitor the 2220 network, you mentioned about that daemon getting
start with
NetView GUI, and getting event from 2220, if it did not run, which meant
2220
not receive any 2220 event? am I right? If I'm wrong, pls tell me how to
start
the "sfevents" daemon after start NetView GUI interface. or I just leave
it alone,
don't care it, once the 2220 receive the network event, then the
sfevents daemon
will start automatically!
By the way, I have an another question about NetView's control desk
"CMIP" event message, why it just show blank always? no any 2220 CMIP
event show up in control desk? is that a normal condition? or I need to
enable some NetView/NBBS function to start the event collection?
does it also related into sfevents daemon?
Hope somebody can give me advise, thanks!
Michael Tsai
ITAP-SSR-RS/6000 & AIX,
Availability Service
IBM Taiwan Corporation,
206, Sec. 1, Keelung Rd., Taipei, Taiwan, R.O.C.
Tel: 886-2-7259365, Fax: 886-2-7201499
Notes ID: MICTSAI/Taiwan/IBM, Internet ID: mictsai@tw.ibm.com
Carsten Strahler <Carsten.Strahler@NBG.NET> on 99/02/04 07:54:06 PM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: Michael Tsai/Taiwan/IBM)
Subject: Re: NetView Daemon did not running - sfevents
This is normal. The daemon sfevents starts together with the Netview GUI.
Its the daemon for getting events from the 2220. So you get only events
from the 2220 when the Netview GUI ist started.
Statement of IBM support : "Works as designed"
Carsten Strahler
craig.morgan@MINDSPRING.COM on 03.02.99 21:31:07
Bitte antworten an NV-L@UCSBVM.ucsb.edu
An: NV-L@UCSBVM.ucsb.edu
Kopie: (Blindkopie: Carsten Strahler/nbg/DE)
Thema: Re: NetView Daemon did not running - sfevents
If I am not mistaken I believe the sfevents is a daemon for your NBBS. Did
you upgrade from a pervious version of NetView? Do you have 2220s in your
network? The NBBS is used to manage them. If I am correct, depending on
what version of NBBS you are running it will not run on NetView V5.1.
-----Original Message-----
From: Discussion of IBM NetView and POLYCENTER Manager on NetView
[mailto:NV-L@UCSBVM.ucsb.edu] On Behalf Of James Shanks
Sent: Wednesday, February 03, 1999 12:25 PM
To: NV-L@UCSBVM.ucsb.edu
Subject: Re: NetView Daemon did not running - sfevents
You are mistaken. NetView does not now have, nor has it ever had, a
daemon called "sfevents". I don't know what it is, or where you got it
from, but we do not ship it.
I suggest you look at the ovsuf file in /usr/OV/conf and find out what
the full path is to the binary executable which this daemon references.
That may tell you who owns it.
By the way, NetView 5.0 is not supported on Framework 3.6. You should
have installed NetView 5.1
James Shanks
Tivoli (NetView for UNIX) L3 Support
Michael Tsai <mictsai@TW.IBM.COM> on 02/01/99 10:56:19 AM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.ucsb.edu>
To: NV-L@UCSBVM.ucsb.edu
cc: (bcc: James Shanks)
Subject: NetView Daemon did not running - sfevents
Hello!
Env: AIX V4.2.1 with Y2k PTFs, NBBS V1.7.1, Netview V5.0, Tivoli Frame
work V3.6
I faced a problem after installed Net V5.0, which is the NetView's
daemon - sfevents
did not running, the detail error as following:
Object manager name: Registered daemons are not running
Behavior: OVs_NON_WELL_BEHAVED
State: NOT_RUNNING
PID: 31782
Exit status: exit(1)
Would appreciated anyone can me some advise for what's going on.
Michael Tsai
ITAP-SSR-RS/6000 & AIX,
Availability Service
IBM Taiwan Corporation,
206, Sec. 1, Keelung Rd., Taipei, Taiwan, R.O.C.
Tel: 886-2-7259365, Fax: 886-2-7201499
Notes ID: MICTSAI/Taiwan/IBM, Internet ID: mictsai@tw.ibm.com
|