Hi Gil,
I had this problem after I upgraded NetView from V5.0 to V5.1 on AIX 4.2.1. To
set the necessary environment at boot up you can insert the following lines at
the very beginning of the script /etc/netnmrc:
LIBPATH="/usr/local/Tivoli/lib/aix4r1/:/usr/lib:/usr/OV/lib${LIBPATH:+:$LIBPATH=}"
export LIBPATH
o_dispatch=94
export o_dispath
This helps in the AIX environment.
bye,
Bernhard Kammerstetter
Softlab GmbH
Moeringgasse 20
A- 1150 WIEN
Telefon (+431) 982 94 00-55
Telefax (+431) 982 94 00-44
E-Mail: kmt@softlab.co.at
----------
Von: Gil Irizarry[SMTP:IRIZARRG@LABS.WYETH.COM]
Gesendet: Donnerstag, 11. Februar 1999 20:59
An: NV-L@UCSBVM.ucsb.edu
Betreff: Re: ovtopmd NOT_RUNNING
Thank you all, that replied.
James recommendation worked fine. The order seams to be the key, 1 then 2 and
last 3. I had started ovsecd ahead of the Tivoli environment variables, so
sequence is important.
How can I get this to happen at boot up time?
I had expected it to be in place since Netview get started at boot up.
Where should I add the sourcing of the Tivoli environment variables for root.
Thanks in advance.
Gil Irizarry
>>> James Shanks <James_Shanks@TIVOLI.COM> 02/10 6:36 PM >>>
ovstatus ovtopmd should tell you the exit code and last message if any.
What ar they? If it is exit 255, then you have a library problem which can
probably be corrected by sourcing the Tivoli environment script and
restarting the daemons:
(1) ovstop nvsecd
(2) . /etc/Tivoli/setup_env.sh (don't forget to preceed this with
dot and a space)
(3) ovstart
If this doesn't work, the only other thing you can do is run ovtopmd from
the command line and see what messages you get. After the ovstart has
failed run /usr/OV/bin/ovtopmd .
Good luck
James Shanks
Tivoli (NetView for UNIX) L3 Support
Gil Irizarry <IRIZARRG@LABS.WYETH.COM> on 02/10/99 04:02:28 PM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.ucsb.edu>
To: NV-L@UCSBVM.ucsb.edu
cc: (bcc: James Shanks)
Subject: ovtopmd NOT_RUNNING
I don't know how or why my ovtopmd and netmon daemons are no longer
running. Prior to installing the Netview client, dtext & books all was
running well. I shutdown for the weekend and when I got back on Monday
re-booted soon after I noticed that my ovtopomd & netmon are no longer
running. snmpget <hostname> .1.3.6.1.2.1.1.1.0 worked fine.
I have clear the databases, rebuild the defaults MIBs using smitty &
executed reset_ci. Yet no help.
How can I do debugging on ovtopmd?
GIl Irizarry
<<application/ms-tnef>>
|