nv-l
[Top] [All Lists]

Re: Regarding forwarding events to TEC !!!

To: nv-l@lists.tivoli.com
Subject: Re: Regarding forwarding events to TEC !!!
From: Doug Horn <Doug_Horn@HSBC.CA>
Date: Tue, 23 Mar 1999 09:18:12 -0800
Reply-to: Discussion of IBM NetView and POLYCENTER Manager on NetView <NV-L@UCSBVM.UCSB.EDU>
Sender: Discussion of IBM NetView and POLYCENTER Manager on NetView <NV-L@UCSBVM.UCSB.EDU>
hi dug

Should we installed TEC and Framework to receive these event?

>You need to have TEC running which means you have to have >framework
installed.  I suppose if you wanted you could >install framework and TEC on
the same system and thats it. >This would make your TEC server also a TMR
server.  If you >were going to add more Tivoli devices, managed nodes,
>gateways, etc. then I think you would want to have another >TMR server for
that purpose.  You could also use a separate >box as your TMR server and
just have the TEC server be a >managed node of the TMR server.

What is the
role of event server in that.
please clarify it.

>The event server is the TEC server.  It will recieve events >from Netview
and put them in the TEC database.


thanks a lot and just bear with my questions.
looking forward to hear from you.
regards
sanjeev

-----Original Message-----
From: Doug Horn [mailto:Doug_Horn@HSBC.CA]
Sent: Monday, March 22, 1999 3:37 PM
To: NV-L@UCSBVM.UCSB.EDU
Subject: Re: Regarding forwarding events to TEC !!!


Netview comes with the TECAD_NV6K adapter which when configured will
forward events to TEC.  You can run it in insecure mode or secure mode, in
secure mode the Netview system has to be a managed node.

I have an open PMR with Tivoli right now because there is a bug with
Netview 5.1 trapd daemon where it does not forward all alerts to TEC, only
generic SNMP and events created with the 'event' command.  They are working
on a patch right now and so you will need to get it when it is available.

regards
dug




Hi to all
can anyone tell me what should(different module e.g framework ,event server
etc) i installed to forward my events from NetView to TEC?
I have WinNT 4.0 OS and NetView 5.1 right now on my machine.
Thanks a lot.

sanjeev

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web