Yesterday I went to National Taiwan University to setup Netview but
failed!
The SUN OS version is 5.5.1
The host name is gigau2
I removed Framework first,and reinstall Framework again.
I can successfully bring up Tivoli desktop,but after I installed Framework
patch
and when to creat NetviewServer ,here comes some information appeared on
the diagnostic window:
---------------------------------------------------------------------------
--
Distributing architecture specific Binaries for gigau2
......................Product install completed successfully
Completed
Distributing architecture specific Server Database for gigau2
.Product install completed successfully
Completed
Distributing architecture specific Netview Base Configuration for gigau2
Something went wrong :
Media Packet :"/cdrom/cdrom0/FILE12.PKT
gigau2:FAILED(soft error)
Failure :the last few lines of the error log
(/tmp/NVS_50_CONFBASE_after.error):
+export ODMDIR
+odmget -qname = nv6000.base.obj lpp
+fgrep nv6000.base.obj base.stanza
rtval=0
+[0!=0]
+set +x
found "TME 10 Netview Server -Base"
version 5 in state 5 (committed)
Please deinstall "nv6000.base.obj"
before install this current version
Completed with errors .
Distributing architecture specific Netview Features for gigau2
..............Completed.
Distributing architecture specific Netview Features Confiruration for
gigau2
Something went wrong
Media Packet :"/cdrom/cdrom0/FILE14.PKT
gigau2:FAILED(soft error)
Failure :the last few lines of the error log
(/tmp/NVS_50_NVFCONF_after.error):
+export ODMDIR
+odmget -qname = nv6000.features.obj lpp
+fgrep nv6000.features.obj features.stanza
rtval=0
+[0!=0]
+set +x
found "TME 10 Netview Server -Features"
version 5 in state 5 (committed)
Please deinstall "nv6000.features.obj"
before install this current version
Completed with errors .
Registering product installtion attributes....registered
Finished product installtion
---------------------------------------------------------------------------
It really generated an icon in the gigau2-region ,but
I can' t run Netview on the command line when typed
"netview" or "nv6000".
I found no "netview" or "nv6000" name included in any path!!
Would you please do me a favor?
Louis Liu
System Engineer
Professional Service Division
Concord System Management Corp.
TEL: 886-2-2506-8636 #180 FAX: 886-2-2507-7937
If it can be better, good is not enough!
|