Another good cisco site that I stumbled across is
http://www.cisco.com/warp/public/79/index.shtml
> -----Original Message-----
> From: Todd E. Lewis [SMTP:telewis@PROVIDENTBANKMD.COM]
> Sent: Tuesday, April 13, 1999 1:18 PM
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Re: Does anyone know what mib/trap files from cisco and
> bayworkwith Netview for NT 5.1?
>
> Ok, thanks. I just find it hard to believe that there's not a white paper
> or more info about this. Netview is intended to monitor the network and
> the network does consist of routers, so one would assume that netview
> would be able to handle traps from these routers, without to much
> tweeking.
>
> >>> Leslie Clark <lclark@US.IBM.COM> 04/13 11:45 AM >>>
> MIB files are flat ascii files, and as long as you ftp them correctly
> for your platform, there should be no problem loading them in Netview
> for NT.
>
> For traps, Cisco provides some help at:
>
> http://www.cisco.com/public/mibs/contrib
> There is a script traps.sh that issues the Netview addtrap command
> for lots and lots of their traps. That would need some modification
> to run on NT, but would not be too hard, I don't think.
> There is also trapd.41x, which is a trapd.conf designed for HP V4.
> You could look at that, and copy needed sections of it into your
> trapd.conf file, as an alternative. Make a backup first. You will
> need to add some Enterprises to go along with the traps. I think the
> fields are the same, but you will want to verify that.
>
> Best bet I think, is to alter the simple traps.sh to run as a bat file
> or a perl script on NT.
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
> (248) 552-4968 Voicemail, Fax, Pager
>
>
> ---------------------- Forwarded by Leslie Clark/Southfield/IBM on
> 04-13-99
> 11:27 AM ---------------------------
>
>
> "Todd E. Lewis" <telewis@PROVIDENTBANKMD.COM> on 04-13-99 11:23:50 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView <NV-L@UCSBVM.UCSB.EDU>
>
> To: NV-L@UCSBVM.UCSB.EDU
> cc: (bcc: Leslie Clark/Southfield/IBM)
> Subject: Re: Does anyone know what mib/trap files from cisco and bay
> workwith Netview for NT 5.1?
>
>
>
>
>
> We have cisco 7000,7513,2503 mostly. Cisco's site talks about mibs but
> they
> appear to be used with HPOV or UNIX version Netview. Do you know of a
> specific on that will work with the models I listed and NEtview for NT?
>
> >>> OGrant <OGrant@PEC.COM> 04/13 11:06 AM >>>
> Regarding cisco, have you checked out http://www.cisco.com/public/mibs/ ?
> Not knowing what type of equipment you have, it may be worth a look -
> Oliver
> Grant
>
> > -----Original Message-----
> > From: Todd E. Lewis [SMTP:telewis@PROVIDENTBANKMD.COM]
> > Sent: Tuesday, April 13, 1999 10:35 AM
> > To: NV-L@UCSBVM.ucsb.edu
> > Subject: Does anyone know what mib/trap files from cisco and bay
> work
> > with Netview for NT 5.1?
> >
> > Does anyone know what mib/trap files from cisco and bay work with
> Netview
> > for NT 5.1?
|