sorry for not specify the operating system.Thanka a lot for your help.
sanjeev
-----Original Message-----
From: James Shanks [mailto:James_Shanks@TIVOLI.COM]
Sent: Friday, May 14, 1999 12:48 PM
To: NV-L@UCSBVM.UCSB.EDU
Subject: Re: Risposta: Regarding the loading of MIB FILE
That is because you are on NT and not on UNIX. It is IMPORTANT that when
you ask a question on this list that you identify the operating system and
level of code you have if you expect to get the right answer.
The MIB loader on NT is called loadmib (for SNMP V1 MIBs only) and
loadmibV2 (for SNMP V2 or V1 MIBs). The syntax is similar to UNIX in that
there is a command line option to load or unload MIBs:
loadmib -load /usr/ov/snmp_mibs/<mib_file> and loadmib -unload
/usr/ov/snmp_mibs/<mib_file>
loadmibv2 -load /usr/ov/snmp_mibs/<mib_file> and loadmibv2 -unload
/usr/ov/snmp_mibs/<mib_file>
If you cd to /usr/OV/snmp_mibs when you issue the command you need not
specify the full path name.
James Shanks
Tivoli (NetView for UNIX) L3 Support
"Sharma, Sanjeev" <Sanjeev.Sharma@USA.XEROX.COM> on 05/14/99 08:50:08 AM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L@UCSBVM.UCSB.EDU>
To: NV-L@UCSBVM.UCSB.EDU
cc: (bcc: James Shanks/Tivoli Systems)
Subject: Re: Risposta: Reagrding the loading of MIB FILE
hi massimo
I am working on winnt 4.0 and i didn't find this command. When i wrote this
command on the dos prompt, it gave me error.
any idea....or clue...
thanks
sanjeev
-----Original Message-----
From: Massimo Carnevali [mailto:Massimo.Carnevali@COMUNE.BOLOGNA.IT]
Sent: Friday, May 14, 1999 4:48 AM
To: NV-L@UCSBVM.UCSB.EDU
Subject: Risposta: Reagrding the loading of MIB FILE
Try looking at
man xnmloadmib
Bye Massimo Carnevali - IBM Global Services -Italy
> Hi all
>I have few mib file and i want to load into the netvie mib loader utility
>while installing my application.
>Is there any api or command line to load the mib into MIB LOADER list.
>thanks a lot.
>regards
>sanjeev
|