nv-l
[Top] [All Lists]

Re: NWays Installation Help!

To: nv-l@lists.tivoli.com
Subject: Re: NWays Installation Help!
From: Matt Ashfield <mda@UNB.CA>
Date: Fri, 16 Jul 1999 14:26:21 -0300
Reply-to: Discussion of IBM NetView and POLYCENTER Manager on NetView <NV-L@UCSBVM.UCSB.EDU>
Sender: Discussion of IBM NetView and POLYCENTER Manager on NetView <NV-L@UCSBVM.UCSB.EDU>
James

Is there a way to keep the midmand daemon from starting at startup? I'm
thinking that my NWays daemons might not start right at reboot because
initially midmand is running, and therefore trapd doesn't start. I thought
this might be what is causing them to reach an UNSTARTABLE state...
Once I stop midmand, trapd is able to run. But my NWays daemons are all in
an unstartable state....


Thanks for your time!

Matt
mda@unb.ca


-----Original Message-----
From: James Shanks <James_Shanks@tivoli.com>
To: NV-L@ucsbvm.ucsb.edu <NV-L@ucsbvm.ucsb.edu>
Date: Thursday, July 15, 1999 5:47 PM
Subject: Re: NWays Installation Help!


>Do netstat -an.  Is 162/udp shown?  Then some process or other has it and
you
>will have to find that one and kill it for trapd to start.  Do a ps -ef
(or
>even ovstatus) and see what you find.  If Nways installed midmand, then
kill it,
>as he cannot run in the same box as NetView without reconfiguration.  Not
him?
>Then find what new stuff is running and kill it one at a time.  Or kill all
the
>daemons down to nvsecd, ovstart trapd, and then ovstart.  I'll bet the guy
who
>has trapd's port won't start if trapd comes up first.   This should get you
back
>and running while you review what took place.
>
>James Shanks
>Tivoli (NetView for UNIX) L3 Support
>

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web