i know what 's the problem is.
i have reinstalled the MLM station. i found that it can monitor status.
Because i have deleted all the enties in the alias table and the status
monitor table that are automatically created with format like
NV x.x.x.x.1 ( where x.x.x.x is the ip of my central netview ).
>From here, i have a question.
The resolve list of the group in alias table can automatically refresh due
to the change of the network.
And why it has similiar colllection group ( mlmdomain_x,x.x.x. - where
x,x,x,x is the ip of the MLM station automatically defined in the collection
editor). Is it used for the central netview to decide which node belong to
which monitoring node 's responsilibity.
Thanks for your previous comment
> -----Original Message-----
> From: Leslie Clark [SMTP:lclark@US.IBM.COM]
> Sent: Wednesday, August 25, 1999 8:50 PM
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Re: my NT MLM can't monitor status and can discover only
>
> Maggie, if you have installed the current levels of all of the code
> and it is still not working, it may be time to call Tivoli Support. What
> you are trying to do should work, and they can help you figure out
> why it is not. (Unless anyone else out there has any ideas...?)
>
> You may need to allow a little time for the central Netview to update
> the NT mlm with its instructions. That can sometimes be speeded
> up by doing a demandpoll on the MLM node.
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
>
>
>
>
> Original my colleague have set a NT MLM within the same subnet.
>
> It 's OK ( can monitor status and discover ).
>
> Due to the hardware limitation, I set up a new one MLM with a new subnet.
> I
> have disable the SNMP service of the Old one.
>
> The Central AIX Netview has defined the Domain Group for the old one and
> for
> the new one. I have included all the workstation in that subnet into the
> new
> domain.
>
> But the subnet is still monitoring by the Central AIX Netview.
>
> The fail of monitoring is due to the setting of the NT MLM or the setting
> of
> AIX Central Netview.
>
> And in the MLM, it will automatically generated some entries in the alias
> table and the statusmonitortable.
> I have erased all of them. But it appear again.
>
> Is there anyone have give me a tips ?
|