I am not familiar with an Intel Router, so maybe they have some specific
issues. But in general Netview must discover the two devices before it
can connect them. You can force this by pinging the router that has not
yet been discovered. If you cannot ping it, it will not be discovered.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
From: Dimitri Setti@ITFCCRT0 on 04/10/99 11.17
To: Discussion of IBM NetView and POLYCENTER Manager on NetView et alia
<NV-L@UCSBVM.UCSB.EDU>
cc:
Subject: router INTEL
Hi at all.....
I have a strange problem: I must monitoring with Nv6000 a remote WAN,
where there is a router cisco connected by ISDN with a remote router INTEL.
NV6000 is able to see only cisco, but not INTEL.
I have done a Demand Pool on cisco , and I have installed INTEL MIB, but nothing
happens.
Is there someone that can help me?
I use Netview 5.0 on Aix 4.2.1.
bye
many thanks
dimitri
***********************************************************************
Dimitri Setti
Fondo Comune Casse Rurali Trentine
via Segantini n.18
38100 TRENTO
ITALY
Tel: +39 461 874.111 centralino
+39 461 874.266 diretto
Fax: +39 461 874.123
e-mail: Dimitri.Setti@fccrt.it
***********************************************************************
|