Stefano,
I'm running AIX 4.3.2, NV 5.1.1, and CW2000 Maint Rel 2 and had the same
problem.
Actually, the same problem occurred in Maint Rel 1 for the 1400s and the
8540-csr. These were identified as bugs (CSCdp04945 and CSCdp04971), but
the fixes did not make it into Maint Rel 2.
If you look in /usr/OV/bitmaps/C, you'll see there is a file with the
product name and ".m" and ".p" suffix, but the base file package is missing.
There are references to the missing packages in /usr/OV/conf/C/oid_to_sym
and /usr/OV/symbols/C/CVTYPE leading to the bitmap error message. Since we
don't have those equipment types, I commented out the reference lines in
oid_to_sym and deleted the paragraphs from CVTYPE (after making a backup
copy of the files) and reran via ovw -config. After that NV started
cleanly. If you need these equipment types, contact Cisco for a fix.
Karin
-----Original Message-----
From: Stefano Franchini <Stefano_Franchini@GIDI.IT>
To: NV-L@UCSBVM.UCSB.EDU <NV-L@UCSBVM.UCSB.EDU>
Date: Friday, October 15, 1999 10:30 AM
Subject: Oggetto: Re: Oggetto: AW: NV 5.1.1
>
>I got the following errors
>
>
>$$$:/tmp >grep Failed check
>Compiling c8540-csr symbols...Failed !
>Compiling 1401 symbols...Failed !
>Compiling 1402 symbols...Failed !
>Compiling 1403 symbols...Failed !
>Compiling 1417 symbols...Failed !
>Compiling wsx6302msm symbols...Failed !
>
>What I have to do now? Just delete them?
>Thanks.
>
>
>
>
>James Shanks <James_Shanks@TIVOLI.COM> il 15/10/99 16.11.31
>
>Rispondere, prego a Discussion of IBM NetView and POLYCENTER Manager on
NetView
> <NV-L@UCSBVM.UCSB.EDU>
>
>Per: NV-L@UCSBVM.UCSB.EDU
>cc: (ccr: Stefano Franchini/CDM Tecnoconsulting)
>Oggetto: Re: Oggetto: AW: NV 5.1.1
>
>
>
>
>
>Try to identify the failing packages by running 'ovw -config' and grep the
>output
>for "Failed".
>You can compare these results to the files in the bitmaps/C directory.
>
>Hope this helps
>
>James Shanks
>Tivoli (NetView for UNIX) L3 Support
>
>
>
>Stefano Franchini <Stefano_Franchini@GIDI.IT> on 10/15/99 11:57:18 AM
>
>Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView
> <NV-L@UCSBVM.UCSB.EDU>
>
>To: NV-L@UCSBVM.UCSB.EDU
>cc: (bcc: James Shanks/Tivoli Systems)
>Subject: Oggetto: AW: NV 5.1.1
>
>
>
>
>
>The file /usr/OV/bitmaps/C/wsc1600.20.m has not 0 byte size! We don't have
any 0
>byte file under that directory. Any other suggestion?
>Thanks.
>
>
>
>
>Schiffinger Ralph 2100 <Ralph.Schiffinger@ERSTEBANK.AT> il 15/10/99
15.31.48
>
>Rispondere, prego a Discussion of IBM NetView and POLYCENTER Manager on
NetView
> <NV-L@UCSBVM.UCSB.EDU>
>
>Per: NV-L@UCSBVM.UCSB.EDU
>cc: (ccr: Stefano Franchini/CDM Tecnoconsulting)
>Oggetto: AW: NV 5.1.1
>
>
>
>
>
>
>This is from earlier postings which I've kept for future reference.
>HTH, Ralph.
>iT-AUSTRIA / OE2100 / WPNM
>Tel (mobil) 0664 1908469
>Tel (iT-A) 21717 58948
>FAX (iT-A) 21717 58979
>Mailto:Ralph.Schiffinger@erstebank.at
>
>Thanks!!!!
>Problem was /usr/OV/bitmaps/C/wsc1600.20.m was 0 bytes. Got the correct
size
>file off my other system and it's working fine now.
>________________________
>Sean Davidson
>Sr. Network Systems Engineer
>Publix Super Markets, Inc.
>P.O. Box 32015
>Lakeland, Fl. 33802-2015
>Email - sean.davidson@publix.com
>Voice - (941) 686-8754 x6889
>Fax - (941)616-5659
>
>-----Original Message-----
>From: Marc Russo [ <mailto:mrusso@AL.IISL.COM>]
>Sent: Thursday, September 09, 1999 12:27 PM
>To: NV-L@UCSBVM.ucsb.edu
>Subject: Re: Error during reading background file
>Some of the bitmap files that CW install during installation are 0 bytes in
>length. Netview does not like this, so he sends this error message. I
>don't remember the exact files, but when you find them, you can just delete
>them, run ovw -fields, and this will clear up the error.
>Marc Russo (mrusso@al.iisl.com)
>International Integrated Solutions, LTD
>
>> -----Urspr
>
|