Thanks - I tried the unmanaged but it did not help.
FYI - Here's the UP and DOWN traps I'm having:
=UP=
Trap #3, specific: 0, args (4):
[1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.14 (Integer): 14
[2] mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr.14 (OctetString):
Serial3/7
[3] mgmt.mib-2.interfaces.ifTable.ifEntry.ifType.14 (Integer): 22
[4] local.linterfaces.lifTable.lifEntry.locIfReason.14 (OctetString):
Keepalive OK
Cisco 7200 [1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.14 (Integer):
14
[2] mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr.14 (OctetString):
Serial3/7
[3] mgmt.mib-2.interfaces.ifTable.ifEntry.ifType.14 (Integer): 22
[4] local.linterfaces.lifTable.lifEntry.locIfReason.14 (OctetString):
Keepalive OK
Cisco7200
=DOWN=
Trap #2, specific: 0, args (4):
[1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.14 (Integer): 14
[2] mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr.14 (OctetString):
Serial3/7
[3] mgmt.mib-2.interfaces.ifTable.ifEntry.ifType.14 (Integer): 22
[4] local.linterfaces.lifTable.lifEntry.locIfReason.14 (OctetString):
Keepalive failed
Cisco7200 [1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.14 (Integer):
14
[2] mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr.14 (OctetString):
Serial3/7
[3] mgmt.mib-2.interfaces.ifTable.ifEntry.ifType.14 (Integer): 22
[4] local.linterfaces.lifTable.lifEntry.locIfReason.14 (OctetString):
Keepalive failed
Cisco7200
> -----Original Message-----
> From: James Shanks [mailto:James_Shanks@TIVOLI.COM]
> Sent: Monday, October 18, 1999 8:36 AM
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Re: Cisco Router Serial Link Trap
>
>
> I am sorry but I didn't see that the subject of your message
> said "Cisco Router
> serial Link trap". I presume the only way to stop this is to
> re-configure your
> router, but I don't have a clue how to do it.
>
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
>
>
>
> James Shanks <James_Shanks@TIVOLI.COM> on 10/18/99 09:27:41 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER
> Manager on NetView
> <NV-L@UCSBVM.UCSB.EDU>
>
> To: NV-L@UCSBVM.UCSB.EDU
> cc: (bcc: James Shanks/Tivoli Systems)
> Subject: Re: Cisco Router Serial Link Trap
>
>
>
>
> Have you tried unmanaging the interface from the GUI?
>
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
>
>
>
> "Chance, Larry" <lchance@SFBCIC.COM> on 10/18/99 09:01:09 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER
> Manager on NetView
> <NV-L@UCSBVM.UCSB.EDU>
>
> To: NV-L@UCSBVM.UCSB.EDU
> cc: (bcc: James Shanks/Tivoli Systems)
> Subject: Cisco Router Serial Link Trap
>
>
>
>
> NetView for NT
>
> I have a serial link that's going up and down 3 times a minute.
> This will go on until the T1 vendor gets their act together and
> can make the link stay up.
>
> But in the meantime, Does anyone know how I can single out
> this interface to stop sending traps?
>
> tia
>
|