Re: Trapgend Daemon Not Starting

[Jennifer Nelson <Jennifer_Nelson@TIVOLI.COM>]

You should check the smux entries in your /etc/snmpd.conf file and be sure they
match the entries in the /etc/snmpd.peers file.  I think there is some
information in the man page for snmpd.conf on smux entries.
-Jennifer


"Ardino, Frank J" <Frank.Ardino@CIGNA.COM> on 11/16/99 01:51:34 PM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on NetView
      <NV-L@UCSBVM.UCSB.EDU>

To:   NV-L@UCSBVM.UCSB.EDU
cc:    (bcc: Jennifer Nelson/Tivoli Systems)
Subject:  Re: Trapgend Daemon Not Starting




James,
Would you take a look at this from the snmpd.log. I turned on trace at 3 for
snmpd, refreshed and did an ovstart on trapgend and this is what it logged.
I have since turned off trace and refreshed. I know your busy, if you can
shed any light it would be appreciated. It's in note pad format.

 <<pmr22069.txt>>
Thanks,

Frank J. Ardino III
CIGNA Corp.
Distributed Operations Center
856.346.5844
frank.ardino@cigna.com


        -----Original Message-----
        From:   James Shanks [SMTP:James_Shanks@TIVOLI.COM]
        Sent:   Tuesday, November 16, 1999 10:46 AM
        To:     NV-L@UCSBVM.ucsb.edu
        Subject:        Re: Trapgend Daemon Not Starting

        Trapgend?  He is a smux peer and I would look in the snmpd.log to
see what is
        going on there as well.  snmpd is up, isn't it?

        But trapgend has nothing to do with communication server.  You don't
mean
        tralertd daemon, do you?  He would most definitely have a comm
server dependency
        because Service Point does.

        James Shanks
        Tivoli (NetView for UNIX) L3 Support



        "Ardino, Frank J" <Frank.Ardino@CIGNA.COM> on 11/16/99 09:05:12 AM

        Please respond to Discussion of IBM NetView and POLYCENTER Manager
on NetView
              <NV-L@UCSBVM.UCSB.EDU>

        To:   NV-L@UCSBVM.UCSB.EDU
        cc:    (bcc: James Shanks/Tivoli Systems)
        Subject:  Trapgend Daemon Not Starting




         I haven't had a problem with this (trapgend), daemon ever. Only
change I
        made to the system was migrate/install of Communications Server
Ver.5.
        System is AIX 4.3.2 and Netview 5.1. Rebooted this weekend this
daemon won't
        come up. Turned all tracing on only noticeable message in
trapgend.log is
        something about youLoseBig.
        I opened a pmr, no luck yet. Wondering if anyone had a similar
situation or
        suggestions.


        Thanks
        Frank Ardino
        Network Management Technical Consultant
        CIGNA Corp.
        frank.ardino@cigna.com

pmr22069.txt
Description: Text - character set unknown