Hi Frank,
Midlevel-Manager and Trapd port do conflict with each other.
both products are using port 162 by default!
You can change the trapd port to 165 and configure the MLM
to forward all traps to that port.
Or simply disable MLM when not using it.
Best regards
Matthias Widmann
"Ardino, Frank J" schrieb:
> Problem Description:
> When system is rebooted. Netview daemons will not start
> get the error "trapd port 162 already in use"
> Never got this before.
> Only after I installed Communications Server Upgrade/migrate to Ver 5.
>
> My work around is to stop Netview Service Point,
> Stop SNA
> Stop smmlm (just in case). This was installed and working before
> Communications Server Upgrade(SNA).
> Then ovstart, and all daemons come up normal.
> Then I start SNA and Service Point don't bother with smmlm, because I don't
> use right now.
>
> Everything comes up fine then.
>
> Any suggestions ???
>
> Frank
> Thanks,
>
> Frank J. Ardino III
> CIGNA Corp.
> Distributed Operations Center
> 856.346.5844
> frank.ardino@cigna.com
|