Hi!
We are running NetView for NT 5.1.1 on Solaris 2.6
.
Environment:
Solaris 2.6
A ruleset has been written with the following functionality:
If a node down event is recieved, a ruleset is activated that will
cancel specific actions (SMS to a mobile phone) if a node up event is
recieved within ten minutes. If no node up event is detected an SMS will
be sent.
There is a strong filtering of events into this rule, a maximum of ~30
events may be out "on hold". Despite this, trapd, nvcorrd, actiond
hangs.
This error has happend only ones, but I´m are interested to hear
your thoughts on why this is happening. Mayby I missed something, but
I sure can not figure out what.. I´ll appreciate any feedback.
This is the ruleset:
RuleSet2 RuleSet NVQryColl3 NVQryColl11
"" 0
NVQryColl3 NVQryColl TrapID4
2 ALLT_BRYGGOR 1 ""
TrapID4 TrapID AttrDelay5 SetNVField10
netView6000 1.3.6.1.4.1.2.6.3 "6 " "58916865 " 0 "netView6000
1.3.6.1.4.1.2.6.3" "REMNODER_NERE Specific 58916865 " ""
0
AttrDelay5 AttrDelay SetNVField6 Action7 Action8 ForwardCorr9
"" 0 "" 720 "" 0 0 0 "2 2 0~"
SetNVField6 SetNVField
ericsson_node aktiv "" 0 0 0 0 2 ""
Action7 Action
" /usr/OV/bin/ovxecho -d 130.100.31.201:0 $NVATTR_2 NERE Haremlarm!!" ""
Action8 Action
"/ericsson/script/larm.sh $NVATTR_2 NERE harem nw-larm " ""
ForwardCorr9 ForwardCorr
""
SetNVField10 SetNVField
ericsson_node vent "" 0 0 0 0 2 ""
NVQryColl11 NVQryColl TrapID12
2 ALLT_BRYGGOR 1 ""
TrapID12 TrapID AttrDelay5.2 NVFldCmp13 NVFldCmp14 ForwardCorr17
netView6000 1.3.6.1.4.1.2.6.3 "6 " "58916864 " 0 "netView6000
1.3.6.1.4.1.2.6.3" "REMNODER_UPPE Specific 58916864 " ""
0
NVFldCmp13 NVFldCmp
ericsson_node vent "" 0 1 1 0 2 0 ""
NVFldCmp14 NVFldCmp Action15 Action16
ericsson_node aktiv "" 0 1 1 0 2 0 ""
Action15 Action
"/usr/OV/bin/ovxecho -d 130.100.31.201:0 $NVATTR_2 UPPE Harem NW-Larm"
""
Action16 Action
"/ericsson/script/larm.sh $NVATTR_2 UPPE harem NW-Larm" ""
ForwardCorr17 ForwardCorr
""
Regards,
Åsa Berglund
Tivoli Nordic Team
IBM Sweden
|