nv-l
[Top] [All Lists]

polling for default routing entries

To: nv-l@lists.tivoli.com
Subject: polling for default routing entries
From: "Fendrick, Gib (CC-MIS)" <Gib.Fendrick@CONAGRA.COM>
Date: Fri, 7 Jan 2000 12:12:56 -0600
Hi all.

I have two Netview/AIX 5.1.1 systems running (production and development).
When we do a Demand Poll on the prod system, it will take about 4 minutes.
And the CPU on the router will shoot up to approx 60% during this time.
The Demand poll display spends most of this time on 'get default routing
entry'.

When we do a Demand Poll on the development system, it takes about 15
seconds.
NO spike in CPU on the router.  No waiting for 'get default routing entry'.
(Actually spends most
of this time waiting to time out on an interface that's down).

It seems to have something to do with the routing table, which on the router
in question is about
1500 route entries.  Is there something we might have done that is
influencing how NetView retrieves
this table?   I've check the SNMP Configuration with the GUI on both
systems, they are the same.

Anyone have any suggestions?

Thanks,
Gib Fendrick
ConAgra, Inc.


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web