Juan,
here is an example of an snmptrap command :
/usr/OV/bin/snmptrap $DSTHOST .1.3.6.1.4.1.930.1.1 172.16.4.200 $TTYPE 0
17254689 1.3.6.1.2.1.2.2.1.1 Integer 99
this example sends a trap as coming from a Bay Networks Centillion 100 ATM
switch (OID = .1.3.6.1.4.1.930.1.1) which IP address is 172.16.4.200
(Rem : 17254689 is a timestamp)
I hope this helps.
Bernard.
> -----Original Message-----
> From: Juan Echevarria [SMTP:echevarria@ES.IBM.COM]
> Sent: dinsdag 11 januari 2000 13:03
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Re: Query database collection Ruleset not working
>
> Bernard,
>
> thanks for your help. Unfortunately, I don't know if that's my case:
>
> Using nvUtil command shows cmr2 is in the collection
>
> $ nvUtil l CiscoISDN
> 195.183.138.197
> 195.183.138.205
> 195.183.138.209
> cmr1
> cmr2
> $
>
> And also querying by oid:
>
> $ ovtopodump cmr2
> CLASS OBJECT ID OBJECT STATUS IP ADDRESS
> NODES 122550/122549 cmr2 Up 194.194.204.67
> $
> $ nvUtil s 122550
> OID 122550 is found in the following collections:
> No_SNMP
> Routers_Backups
> mlmDomain_Default
> $
>
> About sending an snmptrap command using oid, I can't find the option in
> the man
> pages to set the origin to the desired oid.
>
> Many thanks in advance,
> Juan.
>
> Juan Echevarría López
> AT&T Global Network Services
>
>
> BAUDOUX BERNARD <bernard.baudoux@FORTISBANK.COM> on 11/01/2000 12:01:02
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> NetView
> <NV-L@UCSBVM.UCSB.EDU>
>
> To: NV-L@UCSBVM.UCSB.EDU
> cc: (bcc: Juan Echevarria Lopez/Spain/IBM)
> Subject: Re: Query database collection Ruleset not working
>
>
>
>
> Juan,
>
> I think NetView does not recognise cmr2 as being part of the Collection
> (object not found, no objid, etc.)
>
> Perhaps you can use the snmptrap command to issue a trap : there you can
> explicitly specify an objectid
>
> Regards,
> Bernard Baudoux
>
>
> > -----Original Message-----
> > From: Juan Echevarria [SMTP:echevarria@ES.IBM.COM]
> > Sent: dinsdag 11 januari 2000 10:26
> > To: NV-L@UCSBVM.ucsb.edu
> > Subject: Query database collection Ruleset not working
> >
> > Hi
> >
> > I think something isn't working OK in my Netview v5 running on AIX 4.2.1
> > My intention is filter Cisco_LinkUp and Cisco_LinkDown events when they
> > belong
> > to a certain
> > collection (CiscoISDN). However in the following example I accept all
> > traps from
> > that collection.
> >
> > So I've created a Ruleset with the following:
> >
> > Event Stream (block)--->Query Database Collection
> > (Origin/CiscoISDN)--->Forward
> >
> > I activate it creating a Dynamic workspace with that ruleset. Then I
> send
> > an
> > event from Netview with:
> > $ event -E 105 -h cmr2 -a "test event"
> >
> > but it doesn't display anything. Of course, router cmr2 is included in
> > CiscoISDN
> > collection.
> >
> > The log nvcorrd.alog shows the following:
> >
> > 100/05/01 09:56:33 nl_NVcollDnode.C[100] : NVCollCmpDnode::Resolve
> > NVCollCm
> > pDnode(Attr: Origin contained in CiscoISDN) Failed, no objid for attr
> > Origin,
> > obj id = 2887486038
> > 100/05/01 09:56:33 nl_NVcollDnode.C[103] : Object not found
> > 100/05/01 09:56:40 nl_NVcollDnode.C[100] : NVCollCmpDnode::Resolve
> > NVCollCm
> > pDnode(Attr: Origin contained in CiscoISDN) Failed, no objid for attr
> > Origin,
> > obj id = 2371864582
> > 100/05/01 09:56:40 nl_NVcollDnode.C[103] : Object not found
> >
> > What's wrong with that? It aither doesn't work when I generate a trap
> from
> > Cisco
> > router in collection.
> >
> > Many thanks,
> > Juan.
> >
> > Juan Echevarría López
> > AT&T Global Network Services
>
|