I don't think snmpCollect can handle that kind of mib variable, where
the instance has multiple parts. I think you might be able to do it with
the MLM instead, though. It is more flexible (and therefore more
confusing, of course) in what it can collect. You can install it on the
Netview box and configure it directly using smconfig, or use the
APM front end. No promises.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
=======================================================================
Hi all!
I want to collect a MIB data from microsoft subtree
but netview isn't able to do so.
There is a message in the /usr/OV/log/snmpCol.tace
logfile saying that this data may not exist.
Then i tried to see this data using snmpwalk and i was
successful (the data exists twice:
.1.3.6.1.4.1.microsoft.software.wins.pull.pullPnrTable.pPullPnrEntry.pullPnrNoOfSuccRpls.159.50.140.233
and
.1.3.6.1.4.1.microsoft.software.wins.pull.pullPnrTable.pPullPnrEntry.pullPnrNoOfSuccRpls.159.50.160.4
where 159.50.140.233 and 159.50.160.4 are IP address)
Then i tried to use snmpget and i can see both of
those 2 data, but when i tried to do the same without
the instance (159.50.140.233 and 159.50.160.4) i had
the following message: "this variable does not
exists".
But when i used the mib browser and did not set the
instance i had the same result as using snmpwalk.
Does anyone can explain how to collect this data.
Thank you!
Alexis Henry
Banque Nationale de Paris, France
nv_alexis@yahoo.fr
___________________________________________________________
Do You Yahoo!?
Achetez, vendez! @ votre prix! Sur http://encheres.yahoo.fr
|