nv-l
[Top] [All Lists]

Subject: Re: NetView and NAT

To: nv-l@lists.tivoli.com
Subject: Subject: Re: NetView and NAT
From: "Julio Leal" <jjllmm@hotmail.com>
Date: Fri, 12 May 2000 17:14:10 CEST
Martin:
I'd only found these two sites:

http://www.ibmlink.ibm.com/usalets&parms=H_200-037

http://www.tivoli.com/products/index/comp_net_add_trans/

Julio Leal


From: owner-nv-l@tkg.com
Date: 12/05/2000 15:30:13 CET
Subject: Re: [NV-L] NetView and NAT



Leslie

Thanks for your swift reply!  Two more questions:-

1)  Is the product released?
2)  Can you point me towards any URLs with documentation on this product?
(There was nothing obvious on the Tivoli website).

Thanks again,

--
Martin Walder
Tivoli Certified Enterprise Consultant

IT Masters (UK) Ltd
Unit 5, CNC House,
Grand Union Office Park,
Packet Boat Lane,
Uxbridge UB8 2GH

Tel:     +44 (0) 1895 909 500
Mobile:  +44 (0) 771 315 8548
Fax:     +44 (0) 1895 909 501
Internet http://www.itmasters.com


lclark@us.ibm.com wrote:

>The answer is that alone, it does not. This is because most NAT firewalls
>do not handle translation of the addresses in the payload, so snmp queries
>to a device would return results that do not match the translated address
>of
>the device itself. This is why Tivoli has  come out with the CNAT product.
>It sits on a server somewhere else to do the interception and translation,
>and
>it translates addresses in the payload as well as the address of the
>device.
>There is also code that runs on Netview itself, indicating those addresses
>that have been normalized. I have not seen the product, only a presentation
>on how it works.
>
>Cordially,
>
>Leslie A. Clark
>IBM Global Services - Systems Mgmt & Networking
>Detroit
>
>---------------------- Forwarded by Leslie Clark/Southfield/IBM on
>05/12/2000 07:34 AM ---------------------------
>
>Martin Walder <martin.walder@itmasters.com>@tkg.com on 05/12/2000 05:05:44
>AM
>
>Please respond to IBM NetView Discussion <nv-l@tkg.com>
>
>Sent by:  owner-nv-l@tkg.com
>
>To:   NetView Discussion <nv-l@tkg.com>
>cc:
>Subject:  [NV-L] NetView and NAT
>
>This question has been asked in the archives, but not really answered,
>as far as I can tell.  How well does NetView handle NAT?  All I want to
>do is manage a remote machine across a VPN, with one firewall at either
>end.  The config would be NetView 6.0 on a Solaris machine.  Thx.
>
>--
>Martin Walder
>Tivoli Certified Enterprise Consultant
>
>IT Masters (UK) Ltd
>Unit 5, CNC House,
>Grand Union Office Park,
>Packet Boat Lane,
>Uxbridge UB8 2GH
>
>Tel:     +44 (0) 1895 909 500
>Mobile:  +44 (0) 771 315 8548
>Fax:     +44 (0) 1895 909 501
>Internet http://www.itmasters.com
>
>_________________________________________________________________________
>
>NV-L List information (unsubscribing, policies, posting, digest version,
>searchable archives): http://www.tkg.com/nv-l
>
>_________________________________________________________________________
>
>NV-L List information (unsubscribing, policies, posting, digest version,
>searchable archives): http://www.tkg.com/nv-l



_________________________________________________________________________

NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l



________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com


<Prev in Thread] Current Thread [Next in Thread>
  • Subject: Re: NetView and NAT, Julio Leal <=

Archive operated by Skills 1st Ltd

See also: The NetView Web