nv-l
[Top] [All Lists]

Re: Web Settings

To: nv-l@lists.tivoli.com
Subject: Re: Web Settings
From: Bill_Jameson@tivoli.com
Date: Fri, 19 May 2000 10:08:04 -0400

If your "public"  community name is set to read/write,  then you are correct.
Anyone can
change it.   You would normally have your "public"  community name set to read
only, and
then create  another one that is read/write.  The read/write community name
would be for
limited distribution of course.   We are talking about snmp configuration here.
NetView
has no control on how the sys admin person sets up the boxes.

"Focus on remedies, not faults."

Bill Jameson
Tivoli Systems
(919)-486-0292


"Steve Stamper" <sstamper@foremost.com> on 05/19/2000 10:32:40 AM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

To:   "IBM NetView Discussion" <nv-l@tkg.com>
cc:    (bcc: Bill Jameson/Tivoli Systems)
Subject:  Re: [NV-L] Web Settings




>From my PC I open the web interface
(http://NETVIEW_SYSTEM/TME10/NetView/Application.html#) and it shows
Diagnostics, SubMaps, MIB Browser, etc.  I then open the MIB Browser, enter
the name of a system and drill down to say "sysContact"  I then can SET it
which means anyone on the network can SET these MIB values.

Any suggestions?




----- Original Message -----
From: <Bill_Jameson@tivoli.com>
To: "IBM NetView Discussion" <nv-l@tkg.com>
Sent: Friday, May 19, 2000 7:30 AM
Subject: Re: [NV-L] Web Settings


>
>
> Steve,  give us a little more info.  Are you saying that via the web
client you
> can alter
> snmp on the host netview or via the mib browser from the web client you
can
> alter snmp
> on any box (this is ok assuming you have a read/write community name)
>
> "Focus on remedies, not faults."
>
> Bill Jameson
> Tivoli Systems
> (919)-486-0292
>
>
> "Steve Stamper" <sstamper@foremost.com> on 05/19/2000 09:18:31 AM
>
> Please respond to IBM NetView Discussion <nv-l@tkg.com>
>
> To:   NV-L@tkg.com
> cc:    (bcc: Bill Jameson/Tivoli Systems)
> Subject:  [NV-L] Web Settings
>
>
>
>
> I just noticed that users who use the web view of NetView have WRITE
> abilities to SNMP.
>
> How do I disable this?
>
> I've looked around for some documentation on the web interface but don't
> seem to have it.  Any suggestions where I can find?
>
> Steve Stamper
> Grand Rapids, MI
>
>
>
> _________________________________________________________________________
>
> NV-L List information (unsubscribing, policies, posting, digest version,
> searchable archives): http://www.tkg.com/nv-l
>
>
>
> _________________________________________________________________________
>
> NV-L List information (unsubscribing, policies, posting, digest version,
> searchable archives): http://www.tkg.com/nv-l
>

_________________________________________________________________________

NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web