nv-l
[Top] [All Lists]

Re: Database corruption

To: nv-l@lists.tivoli.com
Subject: Re: Database corruption
From: James_Shanks@tivoli.com
Date: Mon, 29 May 2000 08:29:09 -0400

The smitty/Framework option "Resolve Database Inconsistencies" just runs
ovtopofix.  You did that already.  What it does is adjust topology to match
the
object database.  Your objects are still there, which is why it does no
good.

The correct way to remove things is to open your maps, on at time, read-w
rite,
locate the object to be deleted, select it, and use Edit to delete  it from
all
submaps.  After you have done that, then you run ovtopofix.

To get things o

James Shanks
Tivoli (NetView for UNIX and NT) L3 Support


Koo Lawrence <lkoo@woolworths.com.au> on 05/29/2000 03:48:26 AM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

To:   "'NV-L@UCSBVM.UCSB.EDU'" <NV-L@UCSBVM.ucsb.edu>
cc:    (bcc: James Shanks/Tivoli Systems)
Subject:  [NV-L] Database corruption




Hi All,

Do you know if there is any means of removing defunct objects from the
topology database? When a defunct object does get synchronized onto the map,
double clicking it explodes a submap without any interface as suggested by
the last line (NUMBER OF INTERFACES:0) in the output of ovtopodump. The
defunct object entry simply stays in the topology database even when it is
deleted from all maps through the GUI. I tried ovtopofix -a and also Resolve
Database Inconsistencies through smitty but still in vain. This problem has
caused missing links between my site symbols.

Here is an example output from ovtopodump -rl KEW_3640_1:

HOSTNAME: KEW_3640_1
NODE ID: 605047
CREATE TIME: Tue May 23 17:54:32 EETDT 200
MODIFIED TIME: Tue May 23 17:54:32 EETDT 200
SYMBOL CHANGE TIME: Tue May 23 17:54:32 EETDT 200
STATUS: Unknown
FLAGS:  CONNECTOR GATEWAY
DESCRIPTION: Cisco Internetwork Operating System Software  DESCRIPTION: IOS
(tm) 3600 Software (C3640-DS-M), Experimental Version 11.2(19980317:221152)
[rtang-112p 129] DESCRIPTION: Copyright (c) 1986-1998 by cisco Systems, Inc.
DESCRIPTION: Compiled Wed 24-Jun-98 17:24 by rtang
LOCATION: Kewdale Distribution Centre
CONTACT: Modified
SNMP OBJECT ID: 1.3.6.1.4.1.9.1.110
DOES IP FORWARDING: YES
SUPPORTS SNMP: YES
NETMON FLAGS: 0x3d1
SNMP ADDRESS: *** modified ***
SNMP TIMEOUT: 4 seconds
CYCLE TIME: 4 hours, 12 minutes
INIT CONFIG POLL: MAXIMUM TIME
CONFIG POLL: Mon May 15 11:24:18 EETDT 200
NEW NODE POLL: Sun May 14 17:42:53 EETDT 200
TOPOLOGY POLL: MAXIMUM TIME
OTHER POLLING INTERVALS/TIMES:
     2147483647 (MAXIMUM TIME)
     2147483647 (MAXIMUM TIME)
     2147483647 (MAXIMUM TIME)
     2147483647 (MAXIMUM TIME)
     2147483647 (MAXIMUM TIME)
NODE VENDOR: Cisco Systems
NODE AGENT: Cisco Router
NUMBER OF INTERFACES:0

Version info:-
AIX level is 4.2.1.0
TME 10 NetView Information:
* The installed version is: 5.1.1
* The build level is:
/usr/OV/lib/libovw.a:
        Copyright (c) 1992, 1996, 1998 IBM Corporation
        TME 10 NetView V5R1
        libovw.a Mar  9 1999 16:00:50

* The version file information is:

    ProductName:         "TME 10 NetView"
    OperatingSystem:     "AIX"
    Version.Release:     "5.1.0"
    Maintenance.Release: "5.1.1.0"
    FixLevel:            "NVS5110"
    KanjiFixLevel:       "None"
    ClientFixLevel:      "NVC5110"

It would be highly appreciated if you could shed some light on this. Thanks!

Cheers,
Lawrence



**********************************************************************
CAUTION: This Message may contain "confidential" information intended 
only for the use of the addressee named above. If you are not the 
intended recipient of this message you are hereby notified that any
use, dissemination, distribution or reproduction of this message is
prohibited. If you received this message in error please notify 
Mail Administrators immediately. Any views expressed in this
message are those of the individual sender and may not necessarily


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web