problems discovering Cisco 7206

[Kuffer Andreas <Andreas.Kuffer@kuoni.ch>]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

Hi list

We do have two Cisco 7206 in our network and NetView (V6.0 on AIX 4.3.2) has
trouble discovering them.
Both (10.1.1.4 and 10.1.1.5) are in the seedfile and netmon polls them.
I ran netmon in trace mode and found the following strange entry in
netmon.trace (the following output is from 10.1.1.5):
.//nl_snmpstate.c[1887] : addNodeToTopo(10.1.1.5) failed: Topology OK -- no
error

Using ovobjprint there are some entries...but no "icon" for the 7206
OBJECT: 523

        FIELD ID        FIELD NAME                      FIELD VALUE
        10              Selection Name
"10.1.1.5:FastEthernet0/0"
        100             IP Address                      "10.1.1.5"
        101             IP Subnet Mask                  "255.255.255.0"
        102             IP Status                       Normal(2)
        159             isInterface                     TRUE
        164             isHSRP                          FALSE
        169             isIP                            TRUE
        191             SNMP ifType                     Ethernet CSMACD(6)
        192             SNMP ifPhysAddr                 "0x0050538A8C00"
        193             SNMP ifDescr                    "FastEthernet0/0"
        194             SNMP ifSpeed                    100000000
        235             TopM Network ID                 646
        236             TopM Segment ID                 732
        237             TopM Node ID                    524
        250             XXMAP Protocol List             "IP"
        251             XXMAP SAPs Used List            0

OBJECT: 524

        FIELD ID        FIELD NAME                      FIELD VALUE
        10              Selection Name                  "10.1.1.5"
        11              IP Hostname                     "10.1.1.5"
        57              SNMPAgent                       Cisco Router(3)
        62              vendor                          cisco Systems(13)
        102             IP Status                       Normal(2)
        105             isIPRouter                      TRUE
        142             isNode                          TRUE
        145             isConnector                     TRUE
        146             isBridge                        FALSE
        147             isRouter                        TRUE
        148             isHub                           FALSE
        168             routerSysName                   "C7206_UL"
        169             isIP                            TRUE
        185             isSNMPSupported                 TRUE
        187             SNMP sysDescr                   "Cisco Internetwork
Operating System Software 
IOS (tm) 7200 Software (C7200-IS-M), Version 12.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 11-Aug-99 09:39 by phanguye"
        188             SNMP sysLocation                ""
        189             SNMP sysContact                 ""
        190             SNMP sysObjectID
"1.3.6.1.4.1.9.1.108"
        195             isMLM                           FALSE
        196             isSYSMON                        FALSE
        197             isSIA                           FALSE
        198             isManager                       FALSE
        200             isSLM                           FALSE
        201             isSIAOS2                        FALSE
        233             TopM Interface Count            104
        250             XXMAP Protocol List             "IP"
        527             IP Name                         "10.1.1.5"

I cleared the whole database and started from scratch, ran ovtopofix -a,
ovmapcount -a, ovwdbdmap -c, but never saw an icon for one of the 7206.

Does anyone know, what is causing NetView not to show the object? Has
somebody NetView running managing a Cisco 7206? Other users with experiences
with 7206?

Thanks in advance...Andreas

With kind regards / mit freundlichen Gruessen
Andreas Kuffer (System Manager UNIX and Enterprise Management)

Kuoni Travel Ltd.
Dep. TOU
Neue Hard 7
CH-8010 Zuerich 
Switzerland
Telefon : + 41 1 277 52 41
Fax     : + 41 1 272 52 55

<<< the smile that you send out returns to you >>>

Hi list

We do have two Cisco 7206 in our network and NetView (V6.0 on AIX 4.3.2) has trouble discovering them.
Both (10.1.1.4 and 10.1.1.5) are in the seedfile and netmon polls them.
I ran netmon in trace mode and found the following strange entry in netmon.trace (the following output is from 10.1.1.5):

.//nl_snmpstate.c[1887] : addNodeToTopo(10.1.1.5) failed: Topology OK -- no error

Using ovobjprint there are some entries...but no "icon" for the 7206
OBJECT: 523

        FIELD ID        FIELD NAME                      FIELD VALUE
        10              Selection Name                  "10.1.1.5:FastEthernet0/0"
        100             IP Address                      "10.1.1.5"
        101             IP Subnet Mask                  "255.255.255.0"
        102             IP Status                       Normal(2)
        159             isInterface                     TRUE
        164             isHSRP                          FALSE
        169             isIP                            TRUE
        191             SNMP ifType                     Ethernet CSMACD(6)
        192             SNMP ifPhysAddr                 "0x0050538A8C00"
        193             SNMP ifDescr                    "FastEthernet0/0"
        194             SNMP ifSpeed                    100000000
        235             TopM Network ID                 646
        236             TopM Segment ID                 732
        237             TopM Node ID                    524
        250             XXMAP Protocol List             "IP"
        251             XXMAP SAPs Used List            0

OBJECT: 524

        FIELD ID        FIELD NAME                      FIELD VALUE
        10              Selection Name                  "10.1.1.5"
        11              IP Hostname                     "10.1.1.5"
        57              SNMPAgent                       Cisco Router(3)
        62              vendor                          cisco Systems(13)
        102             IP Status                       Normal(2)
        105             isIPRouter                      TRUE
        142             isNode                          TRUE
        145             isConnector                     TRUE
        146             isBridge                        FALSE
        147             isRouter                        TRUE
        148             isHub                           FALSE
        168             routerSysName                   "C7206_UL"
        169             isIP                            TRUE
        185             isSNMPSupported                 TRUE
        187             SNMP sysDescr                   "Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 11-Aug-99 09:39 by phanguye"
        188             SNMP sysLocation                ""
        189             SNMP sysContact                 ""
        190             SNMP sysObjectID                "1.3.6.1.4.1.9.1.108"
        195             isMLM                           FALSE
        196             isSYSMON                        FALSE
        197             isSIA                           FALSE
        198             isManager                       FALSE
        200             isSLM                           FALSE
        201             isSIAOS2                        FALSE
        233             TopM Interface Count            104
        250             XXMAP Protocol List             "IP"
        527             IP Name                         "10.1.1.5"

I cleared the whole database and started from scratch, ran ovtopofix -a, ovmapcount -a, ovwdbdmap -c, but never saw an icon for one of the 7206.

Does anyone know, what is causing NetView not to show the object? Has somebody NetView running managing a Cisco 7206? Other users with experiences with 7206?

Thanks in advance...Andreas

With kind regards / mit freundlichen Gruessen
Andreas Kuffer (System Manager UNIX and Enterprise Management)

Kuoni Travel Ltd.
Dep. TOU
Neue Hard 7
CH-8010 Zuerich
Switzerland
Telefon : + 41 1 277 52 41
Fax     : + 41 1 272 52 55

<<< the smile that you send out returns to you >>>