Re: Netview 6.0 & Nways
I was told that Nways 2.0 should not work with NetView 6.0. My NV daemons
will start but occasionally the NWays daemons stop. I'm going to install
Nways 2.1 today. However, it complains about my OS which is 4.3.3.0.
Ray Westphal
NMSA Systems Administrator
Phone: (314) 512-3867
Fax: (314) 512-5867
Pager: (314) 509-0036
mailto:rwestphal@erac.com
-----Original Message-----
From: owner-nv-l-digest@tkg.com [mailto:owner-nv-l-digest@tkg.com]
Sent: Monday, June 26, 2000 10:01 PM
To: Recipients of NV-L digests
Subject: NV-L Digest - 26 Jun 2000
Messages in this digest:
1 - "=?ISO-8859-1?Q?NV-L=20Digest=20-=2025=20Jun=202000Olen=20kes=E4l?=
=?ISO-8859-1?Q?omalla=2026.-30.6.2000?="
2 - "=?ISO-8859-1?Q?NV-L=20Digest=20-=2025=20Jun=202000Olen=20kes=E4l?=
=?ISO-8859-1?Q?omalla=2026.-30.6.2000?="
3 - "=?iso-8859-1?Q?R=E9f._:__Defining_smartsets_by_loopback_ip-?=
=?iso-8859-1?Q?address?="
4 - "Netview 6.0 & Nways"
5 - "Re:Unwanted Discovery"
6 - "Re: Netview 6.0 & Nways"
7 - "Re: Netview 6.0 & Nways"
8 - "Re: Defining smartsets by loopback ip-address"
9 - "Incorrect Routing"
10 - "NV for NT Security"
11 - "IBM Redbook GG24-4157 Monitoring Performance in Router Networks"
|