Hi Leslie,
It must be voodoo ;) I can create the problems with nvUtil only - it cannot
be the test button (or the reselection of the default settings) - from my
point of you the problem is
if NV is busy with other stuff - the smartsets gets corrupted. On my
workstation with nvUtil e (evaluate) - somethimes all objects are
"evaluated" ;)
Kr, Dietmar
I have gotten in the habit of always doing the test button because on
occasion
I too have seen it grab everything. If I do it over, it does it right.
Nothing really
recreate-able, so I have not called it in. It does seem that if I actually
touch the
buttons rather than let it default (eg touch the True rather than just
going straight
to test after selecting the attribute) it does not happen. Voodoo?
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
dietmar_gaulhofer@AT.IBM.COM@tkg.com on 07/26/2000 09:25:27 AM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: nv-l@tkg.com
cc:
Subject: [NV-L] NV6 and Smartsets
Hej,
Env: NV 6.0, AIX 4.3.2,
I have seen some strange behavior on the Smartset Editor on several NV
Installations, like
- nvcold dying
- Smartset is adding all objects it finds in the Database ! (rule "IP
Hostname" ~ "^dyn") i have seen there objects on the GUI like "IP Internet"
with nvUtil l "rulename" i found things like "MetaConn1234" and so on
.....
- nvUtil e (Evaluate) rule - differs from an allready created Smartset with
the same "rule function" ....
Anybody else seen this ?
Thanks,
Kind Regards,
*************************************************************
Dietmar Gaulhofer, IBM Österreich
Systems Engineer
I************************************************************
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|