The NT TEC adapter doesn't care what you do with mib2trap. It uses the
tecad_nv6k* files in \usr\ov\conf to determine what to do.
In particular, if the enterprise id of these new traps is not in the cds file,
you will have to define it there, and select the data elements (trap variables)
you want sent to TEC. Probably you will have to define a new class or classes
to get all the data you want sent over. Then you have to add Filter statements
in the tecad_nv6k.conf to include these new classes in what is sent. That takes
care of the NetView side. But on the TEC side, you must make a baroc file and
load that into your TEC rulebase in order for TEC to parse these events when
they arrive.
I'd start by reading the TEC manual on adapters. They provide documentation on
all these files and their contents. The tecad_nv6k one they talk about is their
UNIX one, but the NT one shipped with NetView is a cloned port of that, so all
the same information applies.
There is a TEC configurator executable shipped with 6.0 but it is seriously
broken. I wouldn't use it until you 6.0 or you will probably have to rebuild
the conf file by hand anyway.
James Shanks
Team Leader, Level 3 Support
Tivoli NetView for UNIX and NT
Daniel Lehman <dlehman@hurricanetechgroup.com> on 08/24/2000 07:39:34 AM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
To: nv-l@tkg.com
cc: (bcc: James Shanks/Tivoli Systems)
Subject: Re: [NV-L] TEC and Netview
I am using Netview 6.0 for NT..
On Wed, 23 August 2000, lclark@us.ibm.com wrote:
>
>
>
> Daniel, are you using Netview for NT, or Unix? (I don't know the answer,
> I'm just
> asking this tonight so James won't have to ask in the morning.)
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
> Detroit
>
> Daniel Lehman <dlehman@hurricanetechgroup.com>@tkg.com on 08/23/2000
> 08:36:14 PM
>
> Please respond to IBM NetView Discussion <nv-l@tkg.com>
>
> Sent by: owner-nv-l@tkg.com
>
>
> To: nv-l@tkg.com
> cc:
> Subject: [NV-L] TEC and Netview
>
>
>
> I am currently using Netfinity Manager to forward events to Netview via
> SNMP. I
> then would like to forward to Tivoli TEC. The NV6K adapter is setup and
> working
> properly. I added the Netfinity MIBs and ran the mib2trap module to add
> the trap
> settings. The events are viewable in the event monitor log in Netview. No
> Netfinity
> events are showing up in TEC. The default severity registered is
> INDETERMINATE,
> any help would be appreciated. Thank you in advance.
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|