nv-l
[Top] [All Lists]

RE: Error loading MIB file (how to tell V1 from V2)

To: nv-l@lists.tivoli.com
Subject: RE: Error loading MIB file (how to tell V1 from V2)
From: "Ken Karasek" <KGKARASE@hewitt.com>
Date: Fri, 20 Oct 2000 12:50:32 -0500

Thanks Leslie!  That was what I was info I was looking for, and it helps resolve
a vendor support problem I having been having.  I'm going to file this one away
myself.





From: "Leslie Clark/Southfield/IBM" <lclark@us.ibm.com> on 10/19/2000 09:47 PM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

To:   IBM NetView Discussion <nv-l@tkg.com>
cc:
Client:
Subject:  RE: [NV-L] Error loading MIB file (how to tell V1 from V2)



Ken, I have been saving this information for years because I knew
someday someone will ask. According to my notebook.....

Netview mib loader can load SNMPv1 or SNMPv2 mibs, but you need to know
which they are; you can tell by looking at the mib's imports:
SNMPv1 MIBs will reference one or more of the following:
 RFC1155 SNMPv1 Structure of Management Information (SMI)
 RFC1212 SNMPv1 Concise MIB Definitions
 RFC1213 SNMPv1 MIB-II

SNMPv2 MIBS will reference one of more of the following:
 RFC1902 SNMPv1(?) Structure of Management Information (SMI)
  (replaces RFC1442 which is now HISTORIC)
 RFC1904 SNMPv2 Conformance Statements
or
 SNMPv2-SMI (refers to 1902 above)
 SNMPv2-CONF (refers to 1904 above)

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit

"Ken Karasek" <KGKARASE@hewitt.com>@tkg.com on 10/13/2000 12:09:06 PM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

Sent by:  owner-nv-l@tkg.com


To:   IBM NetView Discussion <nv-l@tkg.com>
cc:
Subject:  RE: [NV-L] Error loading MIB file





Mark,

How were you able to identify the MIB below in question being a SNMPv2 MIB?
I
have received similar message below from trying to load vendor MIB's in the
past.




From: Mark_LaFever@cargill.com on 10/12/2000 01:55 PM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

To:   nv-l@tkg.com
cc:
Client:
Subject:  RE: [NV-L] Error loading MIB file



Chris,
      If you are using the snmpV1 loader to load snmpV2 mibs you will
get this message. Try using the snmpV2 loader in NetView and it should
work. Tools, MIB, SNMPV2, Load and then select the mib file.

Good luck,
Mark LaFever
Network Analyst
Excel Corp.
316-291-2926

-----Original Message-----
From: chrisp@ucia.gov [mailto:chrisp@ucia.gov]
Sent: Thursday, October 12, 2000 10:14 AM
To: NV-L@UCSBVM.ucsb.edu
Subject: FW: [NV-L] Error loading MIB file



I am trying to load a mib file (ENTITY-MIB) for the Cisco Catalyst 6509
and am getting the following error.  I don't have a lot of experience
doing this and was wondering if someone could provide some help.
Thanks.


Error detected while loading MIB file ENTITY-MIB.MY
This MIB cannot be loaded until the following problem is corrected

Line 25: Error defining object: found 'MODULE-IDENTITY'

OBJECT IDENTIFIER
OBJECT-TYPE
TRAP-TYPE
::=


________________________________________________________________________
_
NV-L List information and Archives: http://www.tkg.com/nv-l





_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web