Re: BandwidthUtilHdx statistics in Netview

[Jane Curry <jane.curry@skills-1st.co.uk>]

Exactly as Alfred says.  However, if you ever move this expression to be
collected by an MLM Threshold table, THEN you will need to take into
account the collection duration.
Cheers,
Jane

REIBENSCHUH Alfred wrote:

>  hi !:)since the if*Octets are counters, snmpcollect already gives you
> the right delta values mfG. Alfred Reibenschuh
> INFORMATIONSTECHNOLOGIE AUSTRIA GMBH
> TELEKOMMUNIKATION
> Networkmanagement
> Intranet Info-koordinator
> A-1020 Wien, Lassallestrasse 5
> T: ++43-1-21717-58947
> F: ++43-1-21717-58979
> E: alfred.reibenschuh@it-austria.com
>
>      -----Original Message-----
>      From: Tsubasa_Kimura@TIVOLI.COM
>      [mailto:Tsubasa_Kimura@TIVOLI.COM]
>      Sent: Wednesday, November 08, 2000 5:01 PM
>      To: nv-l@tkg.com
>      Subject: [NV-L] BandwidthUtilHdx statistics in Netview
>
>
>
>      List,
>
>            The formula in mibexpr.conf is BandwidthUtilHdx =
>      (8*100*(IFin+IFout))/IFSpeed. Now, the formula should be a
>      percentage but IFin and IFout are both in bytes which get
>      converted to bits by multiplying by 8 but IFSpeed in bits
>      per second. The result of the division is still in
>      seconds with a multiplication of 100 for it to be a
>      percentage. So the question is whether we still need to
>      divide the formula with the collection duration to get a
>      real percentage figure.
>
>
>      Thank you,
>      Tsubasa
>
--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2000 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights
reserved.


Exactly as Alfred says.  However, if you ever move this _expression_
to be collected by an MLM Threshold table, THEN you will need to take into
account the collection duration.
Cheers,
Jane

REIBENSCHUH Alfred wrote:

 hi !:)since the if*Octets are counters, snmpcollect already gives you the right delta values mfG. Alfred Reibenschuh
INFORMATIONSTECHNOLOGIE AUSTRIA GMBH
TELEKOMMUNIKATION
Networkmanagement
Intranet Info-koordinator
A-1020 Wien, Lassallestrasse 5
T: ++43-1-21717-58947
F: ++43-1-21717-58979
E: alfred.reibenschuh@it-austria.com

-----Original Message-----
From: Tsubasa_Kimura@TIVOLI.COM [mailto:Tsubasa_Kimura@TIVOLI.COM]
Sent: Wednesday, November 08, 2000 5:01 PM
To: nv-l@tkg.com
Subject: [NV-L] BandwidthUtilHdx statistics in Netview
 

List,

      The formula in mibexpr.conf is BandwidthUtilHdx = (8*100*(IFin+IFout))/IFSpeed. Now, the formula should be a percentage but IFin and IFout are both in bytes which get converted to bits by multiplying by 8 but IFSpeed in bits per second. The result of the division is still in
seconds with a multiplication of 100 for it to be a percentage. So the question is whether we still need to divide the formula with the collection duration to get a real percentage figure.
 

Thank you,
Tsubasa

--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2000 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights reserved.