My responses below
James Shanks
Team Leader, Level 3 Support
Tivoli NetView for UNIX and NT
michael.hamm@tudor.lu on 11/13/2000 09:49:46 AM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
To: nv-l@tkg.com
cc: (bcc: James Shanks/Tivoli Systems)
Subject: [NV-L] Load Mib dont affekts on trapd.conf
>>is it right, that loading several MIBs with the
>>"Option - Load/unload MIBs" command
>>dont have any kind of affekts to the trapd.conf file???
Yes. That is correct. To turn a MIB into a trap it must contain trap
definitions (either TRAP-TYPE or NOTIFICATION-TYPE) and you must first use
mib2trap to produce an addtrap script which can then be used to
update trapd.conf
>>And that NetView applikations like Ruleset Editor
>>or Filter Editor cannot access to OIDs in this new
>>added MIBs?????
It will allow you to use the new MIB OIDs in the Compare MIB Variable or
Set MIB variable provided what you did was load an SNMP V1 MIB with the
SNMP V1 loader, xnmloadmib. If you use a V2 MIB which you load with the
SNMPV1/V2 loader, xnmloadmib2, you will not see the new OIDs in the ruleset
dialog. You can still type the value in manually however. In fact you
don't have to have the MIB loaded at all for that to work.
>>But the MIB-Browser now list the new OIDs.
>>Is that all o.k. or is there something wrong???
You will have to tell me that
>>Michael
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|