That's right, you can manage just fine with no traps at all. Many people
do. And for many devices, where trap configuration is 'all or nothing',
that's best.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
"S. Varathu, IBM" <Varathu@bom4.siemens.co.in>@tkg.com on 03/17/2001
09:01:21 PM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: "'IBM NetView Discussion'" <nv-l@tkg.com>
cc:
Subject: RE: [NV-L] Netview discovery status
Thanks leslie, so status changes in topology and object database are
entirly depends on netmon polling. am i right? it wonn't care if device
sends trap.
thanks,
varadhu
> -----Original Message-----
> From: Leslie Clark [SMTP:lclark@us.ibm.com]
> Sent: Saturday, March 17, 2001 9:13 PM
> To: IBM NetView Discussion
> Subject: RE: [NV-L] Netview discovery status
>
> Status changes are reflected in both the topology database and
> the object database when netmon notices that something has
> changed. That means every 10 minutes or whatever your polling
> cycle is. BUT - if you put on 6.02, it actively reacts to generic traps
> for cold start, warm start, link up, and link down. I've seen this
> work very well. It does not just react, it goes and checks, so
> the same netmon events are generated as when it does its normal
> polling. So your rulesets don't need to change.
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
> Detroit
>
>
> "S. Varathu, IBM" <Varathu@bom4.siemens.co.in>@tkg.com on 03/17/2001
> 04:21:46 AM
>
> Please respond to IBM NetView Discussion <nv-l@tkg.com>
>
> Sent by: owner-nv-l@tkg.com
>
>
> To: "'IBM NetView Discussion'" <nv-l@tkg.com>
> cc:
> Subject: RE: [NV-L] Netview discovery status
>
>
>
> Thanks Les, But still i have doubt. For an example, if i define netmon
> polling interval is 10mts. when it polls to device and one of the
> interface
> is down for the device and display the same down inofrmation in
> GUI.(object
> DB also). Immediately after the poll, the interface is UP, so the device
> send the trap information to netview about the status. In that case what
> would be the object database? will netview display "UP" information?
>
> Once again thanks for the info..
>
> varadhu
>
>
> > ----------
> > From: Les Dickert[SMTP:lesdickert@hotmail.com]
> > Sent: Friday, March 16, 2001 10:26 PM
> > To: nv-l@tkg.com
> > Subject: Re: [NV-L] Netview discovery status
> >
> > Yes, NetView updates the status of objects in
> > the database, and on the maps, based on polling
> > for status. Events received by NetView have no
> > affect on either, unless you write a special event
> > (trap) handler to do it. James Shanks has previously
> > (many times) posted a method of changing the status
> > of an object, which could be done upon receipt of
> > an event, but remember that NetView (netmon) is still
> > going to poll for status and might change the status
> > right back.
> >
> > Remember that if a device can send an event trap
> > to NetView that means there is IP connectivity to
> > the device and therefore netmon will think it is
> > up and operational.
> >
> > Les Dickert
> > Verisign Consulting
> >
> >
> > >From: "S. Varathu, IBM" <Varathu@bom4.siemens.co.in>
> > >Reply-To: IBM NetView Discussion <nv-l@tkg.com>
> > >To: "'nv-l@tkg.com'" <nv-l@tkg.com>
> > >Subject: [NV-L] Netview discovery status
> > >Date: Fri, 16 Mar 2001 15:41:41 +0530
> > >
> > >hi,
> > >
> > >Does netview update the status of objects in topology database based
on
> > >polling on each device or can trap event generated by the device (say
> > >router) which reflect to corresponding change in topology map?
> > >
> > >Regards,
> > >varadhu
> > >
> _________________________________________________________________________
> > >NV-L List information and Archives: http://www.tkg.com/nv-l
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >
> _________________________________________________________________________
> > NV-L List information and Archives: http://www.tkg.com/nv-l
> >
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|