nv-l
[Top] [All Lists]

RE: import maps?

To: nv-l@lists.tivoli.com
Subject: RE: import maps?
From: Alain.Cogghe@electrabel.com
Date: Mon, 23 Apr 2001 15:32:22 +0200
I think you made a mistake here , should it not be :  tar -cvf oldmap.tar
/usr/OV/databases/openview 

Alain Cogghe 
Datacom                                             Tel:   02-206 34 59
(intern 80.3459)
Electrabel IT-Services                         Fax:  02-203 48 18
Werkhuizenkaai 16  - Q291 1000 Brussel   Mail:Alain.cogghe@electrabel.com





-----Original Message-----
From: Leslie Clark [mailto:lclark@us.ibm.com]
Sent: maandag 23 april 2001 15:05
To: IBM NetView Discussion
Subject: Re: [NV-L] import maps?


Yes, you can port the map from your old system to the new one, in most
cases.
Make a tar file of the databases:
      tar  -xvf oldmap.tar  /usr/OV/databases/openview
Move that file over to the new system, and restore it. Use pax to restore
it, because
Netview uses the sparse filesystem, and if you use tar to restore it, it
will be very
very large.
  pax -rp e -f oldmap.tar
Do this as root, with all daemons stopped.

Restart the daemons. You will also have to do a
  mapadmin  -h <hostname>
on the new system.

Next you should open an map and delete and rediscover your new Netview
system. This usually works ok. If the address of the new system is very far
away from the old system, you might still have problems, and be forced to
rediscover. You may want to rediscover eventually just to clean out any old
corruption in the database.

There are ways to make seedfiles from the contents of the existing
database,
and the new location.conf file processing can help ease the work of the
re-customization.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit

salvatore_pagano@it.ibm.com@tkg.com on 04/23/2001 03:07:26 AM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

Sent by:  owner-nv-l@tkg.com


To:   nv-l@tkg.com
cc:
Subject:  [NV-L] import maps?





I need an information. I have a network  with 35000 objects, 1000 are
routers, an "old" Netview 5.1 (no seed file)  on AIX 4.3.2 and a very
custom designed maps of the network.
I have installed another system with Netview 6.02 on AIX 4.3.3, I would
like not to lose the maps but to bring in full her on the new system. Is
possible to import the maps from the old Netview ?
Sorry for the poor english.
Thanks

Salvatore Pagano
----------------------------------------------------------------------------


IBM Italia S.p.A.
tel . 0335 - 7368541
e_mail: salvatore_pagano@it.ibm.com


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web