Hi Danny,
Do your routers have loopback interfaces (or could they)??. Here is a
possibility:
1) Ideally, the router will have a loopback interface - put this in the
seedfile
2) Loopback interfaces are now discovered by default from NetView 6.0
(with the exception of 127.0.0.1)
3) Once the router has been fully discovered, unmanage the ISDN
interface so it
Æs normal, DOWN status does not contribute to a yellow,
MARGINAL router. Let
Æs say, for a small router you have 3 interfaces, a
primary WAN, a backup ISDN and a loopback. So, in normal operation, you
have:
WAN i/f Up Green
ISDN i/f Down/Unmanaged Wheat
Loopback i/f Up Green
Router overall Up Green
When the WAN line fails, the ISDN backup should kick in, giving:
WAN i/f Down Red
ISDN i/f Up/Unmanaged Wheat
Loopback i/f Up Green
Router overall Marginal Yellow
4) This scenario relies on the fact that you can still reach the
loopback interface via the ISDN interface
Cheers,
Jane
--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2001 Jane Curry <jane.curry@skills-1st.co.uk>. All rights
reserved.
=========================================================================
Danny Williams
Tivoli & AIX Specialist
IBM Global Services - Integrated Technology Services
mailto:danny@uk.ibm.com
Tel: 665520 (01926-465520) -- MOBX: 275520 (07967-275520)
|