Make sure you configure NetView's trapd to listen on a different port
number than 162 as the MLM will be using this. Also configure the MLM to
forward status traps etc to the new port number you've chosen for trapd.
On a separate topic, I don't think 6.0.2's RFI feature will work correctly
in an MLM environment, so you may want to turn that off if you are using it
(on by default).
Gareth Holl
Software Engineer
gholl@tivoli.com
Tivoli Systems / IBM Corporation
Research Triangle Park, North Carolina. 1-800-TIVOLI-8
-----------------------------------------------------------------------------------------------------------
No matter what happens, somebody will find a way to take it too seriously
helmut.schroeder.hs@bayer-ag.de@tkg.com on 07/09/2001 04:08:34 AM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: IBM NetView Discussion <nv-l@tkg.com>
cc:
Subject: [NV-L] MLM Design
Hi all,
are there any restrictions/ known problems with the installation of
NetView (6.02) and MLM on the same system (AIX) ?
Background: Actually a central NetView manages a branch site via MLM,
now additional regional managers were requested for different reasons
(and one central system will not be capable of managing it all ...)
So the idea is to install another NetView on the current MLM and let the
MLM
work for both NetViews .... (no NT / attended MLM possible, AIX is
mandatory)
Any comment is appreciated !
Helmut Schroeder
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|