nv-l
[Top] [All Lists]

Re: Instances of a router

To: nv-l@lists.tivoli.com
Subject: Re: Instances of a router
From: "Leslie Clark" <lclark@us.ibm.com>
Date: Tue, 24 Jul 2001 08:18:47 -0400
The index listed in 'Monitor...Network Configuration...Addresses'
points to the ifIndex field in the interface table. That is the instance
you need to specify. Or, from the commandline, rnetstat -I <node>.

And if you modify the MIB Application behind 'Monitor...MIB Vaues..
Interface Info' to include the ifIndex value, as Helmut points out,
you can do further correlation between addresses and what are
often virtual interfaces, just to be you have chosen the right one.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit

helmut.schroeder.hs@bayer-ag.de@tkg.com on 07/24/2001 05:48:57 AM

Please respond to IBM NetView Discussion <nv-l@tkg.com>

Sent by:  owner-nv-l@tkg.com


To:   IBM NetView Discussion <nv-l@tkg.com>
cc:
Subject:  Re: [NV-L] Instances of a router






Yes, the interface index
(.iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex)
corresponds to the instance number.
Look at  the instances of
.iso.org.dod.internet.mgmt.mib-2.ifMIB.ifMIBObjects.ifXTable.ifXEntry.ifName

for a the descriptive text of each interface
(but in the data collection definition you have to specify the instance #)

Regards  - Helmut Schroeder





"Jesus Corral Arroyo" <jesus_corral_arroyo@es.ibm.com>@tkg.com on
24.07.2001
11:23:38

Bitte antworten an IBM NetView Discussion <nv-l@tkg.com>

Gesendet von:  owner-nv-l@tkg.com



An:   nv-l@tkg.com
Kopie:
Blindkopie:
Thema:    [NV-L] Instances of a router

Hi all,
I am collecting data of some routers and, when I customize the Data
Collection and Threshold SNMP.... one of the fields I have to fill up is
Instances. So, my question is if there is a way using NetView to see the
correspondence between the number of the instance and the IP address of the
routers cards. I mean I know there is a MIB where you can see the IfIndex
and I do not know if the number you can see in this IfIndex is the number
of each instance of the router. If so, it should not be difficult at all to
get the correspondence but I am not sure things work this way. If not, How
can I get this correspondence?

Thkx at all for your help.

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l




_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web