Bill -
Is all there is to the MIB? mib2trap must have either TRAP-TYPE (SNMP V1)
or NOTIFICATION-TYPE (SNMPV2) statements in the MIB which define a trap
otherwise it has nothing to do. In that case the output files would be
empty.
If there is more to the MIB and you still get no output, try loading the
MIB with xnmloadmib2 the SNMPV1/V2 loader and see if you get error
messages.
James Shanks
Team Leader, Level 3 Support
Tivoli NetView for UNIX and NT
"McCarter, Bill" <mccarter_we@naptheon.com>@tkg.com on 07/24/2001 10:08:34
AM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: "IBM NetView Discussion (E-mail)" <nv-l@tkg.com>
cc:
Subject: [NV-L] mib2trap usage
I have been given the following IBM mib to load and the mib2trap command is
not working. It doesn't
give me a error it just doesn't put any addtrap commands into the file, it
does put some comments about
creation date in the baroc file, but no acutal baroc definitions. I have
used mib2trap before just fine. Thanks in
advance for any help.
Netview 6.0.2, Solaris 2.6.
mib2trap ibm2100.mib.txt ibm2100.mib ibm2100.baroc
Here's a short version.
Ibm2100-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
Counter, enterprises, TimeTicks
FROM RFC1155-SMI
ibmProd, alert
FROM ibm-mib
alertType, alertDescription, probableCause
FROM IbmFaultMgmt-MIB
DisplayString
FROM RFC1213-MIB;
-- These Extension groups follow the structure of MIB-II
-- Actual definition of MIB Subtree:
ibm OBJECT IDENTIFIER ::= { enterprises 2 }
ibmProd OBJECT IDENTIFIER ::= { ibm 6 }
ibm2100 OBJECT IDENTIFIER ::= { ibmProd 130 }
--
-- IBM 2100 Storage Server MIB groups
--
-- The ibm2100 MIB groups contain information that identifies a
-- Storage Server unit, and information that further identifies the
-- cause and unit status that is associated with a Trap message.
--
ssSystem OBJECT IDENTIFIER ::= { ibm2100 1 } -- system level objects
ssProblem OBJECT IDENTIFIER ::= { ibm2100 2 } -- problem records
-- ******************************************************************
--
-- Storage Server system group
--
ssSystemAccess OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A count of the number of times this private MIB variable
is accessed. For sub-agent test and verify."
::= { ssSystem 1 }
--
END
|