Re: changing IP NetView for NT 6.02

["Jennifer Parker" <jparker@us.tivoli.com>]

This is a multipart message in MIME format.

Martyn - 

Have you checked the users guide?  Page 223 has these instructions:

Changing the IP Address or Name
The following two sections describe the actions you must perform if the IP 
address or host name of the NetView server or client changes.

Changing the Server IP Address or Name
If you have installed NetView in the Single User mode or Server you only 
need to check the file
\%SYSTEMDIR%\system32\drivers\etc\hosts 
to ensure that the entries are correct for the management station.

If you have NetView clients connected to this NetView server, check the 
following on each client:
- Ensure that the client can resolve the new IP address and name.  You can 
check this using the host.exe utility. Add an entry to the 
\%SYSTEMDIR%\system32\drivers\etc\hosts 
file for the new address and name of the server.
- Use the Registry Editor to modify the ServerName and ServerAddress 
entries in
HKEY_LOCAL_MACHINE\SOFTWARE\Tivoli\NetView\CurrentVersion
- Ensure that the NetView share is still mounted correctly and is assigned 
the drive letter indicated by the system variable NV_MOUNT_DRIVE.

Regards,
Jennifer Parker
NetView for UNIX/NT Level 2 Software Engineer 
***********************************************************************
Plan Your Migration NOW!  End of Support Dates are:
NetView  V5.0    -  May 9, 2001
NetView  V5.1.x  -  Jan 2, 2002
***********************************************************************
Need help with Tivoli Software Products? 
                          Ask Tivoli! 
          http://www.tivoli.com/asktivoli




"Martyn Oram" <martyn@northwind.com>
Sent by: owner-nv-l@tkg.com
08/09/2001 03:06 PM
Please respond to IBM NetView Discussion

 
        To:     <nv-l@tkg.com>
        cc: 
        Subject:        [NV-L] changing IP NetView for NT 6.02

 

Hi List.

I am about to change the IP address of my NT 4.0 server that is a TMR 
server
(framework 3.7.1), has TEC 3.7, and NetView for NT 6.02 installed also.

I cannot seem to find instructions for IP address changes on NetView for 
NT,
I can only find UNIX specific instructions. For example, the reset_ci
command doesn't even exist on NT.

Can anyone tell me where I can find how to change the IP address for 
NetView
for NT 6.02?

THanks, Martyn.

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l



Martyn - 

Have you checked the users guide?  Page 223 has these instructions:

Changing the IP Address or Name
The following two sections describe the actions you must perform if the IP address or host name of the NetView server or client changes.

Changing the Server IP Address or Name
If you have installed NetView in the Single User mode or Server you only need to check the file
\%SYSTEMDIR%\system32\drivers\etc\hosts 
to ensure that the entries are correct for the management station.

If you have NetView clients connected to this NetView server, check the following on each client:
- Ensure that the client can resolve the new IP address and name.  You can check this using the host.exe utility. Add an entry to the 
\%SYSTEMDIR%\system32\drivers\etc\hosts 
file for the new address and name of the server.
- Use the Registry Editor to modify the ServerName and ServerAddress entries in
HKEY_LOCAL_MACHINE\SOFTWARE\Tivoli\NetView\CurrentVersion
- Ensure that the NetView share is still mounted correctly and is assigned the drive letter indicated by the system variable NV_MOUNT_DRIVE.

Regards,
Jennifer Parker
NetView for UNIX/NT Level 2 Software Engineer 
***********************************************************************
Plan Your Migration NOW!  End of Support Dates are:
NetView  V5.0    -  May 9, 2001
NetView  V5.1.x  -  Jan 2, 2002
***********************************************************************
Need help with Tivoli Software Products? 
                          Ask Tivoli! 
          http://www.tivoli.com/asktivoli

"Martyn Oram" <martyn@northwind.com> Sent by: owner-nv-l@tkg.com 08/09/2001 03:06 PM Please respond to IBM NetView Discussion

To:        <nv-l@tkg.com>         cc:                 Subject:        [NV-L] changing IP NetView for NT 6.02

Hi List.

I am about to change the IP address of my NT 4.0 server that is a TMR server
(framework 3.7.1), has TEC 3.7, and NetView for NT 6.02 installed also.

I cannot seem to find instructions for IP address changes on NetView for NT,
I can only find UNIX specific instructions. For example, the reset_ci
command doesn't even exist on NT.

Can anyone tell me where I can find how to change the IP address for NetView
for NT 6.02?

THanks, Martyn.

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l