| To: | nv-l@lists.tivoli.com |
|---|---|
| Subject: | RE: NetView development help |
| From: | "Jennifer Parker" <jparker@us.tivoli.com> |
| Date: | Thu, 9 Aug 2001 16:32:42 -0400 |
This is a multipart message in MIME format. My recommendation would have to Dennis Ritchie's The C Programming
Language. I mean, after all, he wrote the language, what better book to
read?
Regards,
Jennifer Parker
NetView for UNIX/NT Level 2 Software Engineer
***********************************************************************
Plan Your Migration NOW! End of Support Dates are:
NetView V5.0 - May 9, 2001
NetView V5.1.x - Jan 2, 2002
***********************************************************************
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli
Dean Sullinger <DSullinger@dot.state.az.us>
Sent by: owner-nv-l@tkg.com
08/09/2001 08:36 AM
Please respond to IBM NetView Discussion
To: "'IBM NetView Discussion'" <nv-l@tkg.com>
cc:
Subject: RE: [NV-L] NetView development help
One last item on this and I won't bring it up here again.
I am no expert on C, most of the C apps I have written were no longer than
30 or 40 lines of code and all in ANSI C. Does anyone have a suggestion
on
a good C book... Not C++, but just C, especially if it center on Solaris.
Most books I have checked into are for Microsoft C++ or just plain C++, it
seams to be hard to find a book center on just C.
Thanks
Dean
-----Original Message-----
From: James Shanks [mailto:SHANKS@us.tivoli.com]
Sent: Wednesday, August 08, 2001 3:35 PM
To: IBM NetView Discussion
Subject: RE: [NV-L] NetView development help
Not sure I can help Bob, but perhaps I can help Dean. Solaris is very
picky
about string operations. Basically you have to check each string and make
sure it is not null or that you are not using a null pointer or it will
core. For the port to Solaris from AIX, NetView development had to replace
all the standard string operations with ones that checked the length and
pointers first.
Hope this helps
James Shanks
Level 3 Support
Tivoli NetView for UNIX and NT
Please note that my id has changed.
If you need to reply, send to shanks@us.tivoli.com
when outside of IBM/Tivoli or to
James Shanks/Raleigh/IBM@IBMUS when inside.
Dean Sullinger <DSullinger@dot.state.az.us>@tkg.com on 08/08/2001 05:21:47
PM
Please respond to IBM NetView Discussion <nv-l@tkg.com>
Sent by: owner-nv-l@tkg.com
To: "'IBM NetView Discussion'" <nv-l@tkg.com>
cc:
Subject: RE: [NV-L] NetView development help
LOL!!!
Sorry Bob, but I have been working on a small app to convert a 32-bit
decimal word to an IP address for over a week. I blew the thing together
under Windows, but as I am working on it under Solaris, I am having all
kinds of problems with basic commands that should work (strcat, strcpy), I
keep getting a Coredump... I wonder if this only happens with gcc and not
the Sun's C for Solaris.
(sorry this is off topic)
Dean
-----Original Message-----
From: Bob Nashus [mailto:bobnashus@yahoo.com]
Sent: Wednesday, August 08, 2001 2:11 PM
To: nv-l@tkg.com
Subject: [NV-L] NetView development help
Help!
I've written a C++ app that integrates with NetView
5.1 under AIX and Solaris. When I build (with gcc) and
run in on AIX 4.2.x, no problems. When I build on
Solaris 2.5.1 w/ gcc-2.95.1, I have problems (I've
also tried on 2.8 w/ gcc-2.95.3 and I get the same
errors).
Specifically, I get several warnings during the link
phase. I usually don't worry about warnings, however,
the app does not work as expected when I run it (it
does however work just fine under AIX).
Here are the details:
I compile and link with:
"c++ -DNDEBUG -D_REENTRANT -fpermissive -g -I. I../usr/OV/include
-L../usr/OV/lib -L/usr/openwin/lib -L/usr/ucblib -R/usr/OV/lib
MyProgram.cpp
-lovsnmp -lovw -lov -lnsl -ldl -lkstat -lw -lposix4 -lpthread"
Here's an example of the warnings I get:
"ld: warning: symbol `bad_exception virtual table' has differing sizes:
(file ../usr/OV/lib/libovw.so value=0x18; file
/usr/local/lib/gcc-lib/sparc-sun-
solaris2.5.1/2.95.1/libgcc.a(exception.o) value=0x20);
/usr/local/lib/gcc-lib/sparc-sun-
solaris2.5.1/2.95.1/libgcc.a(exception.o)
definition taken"
One other thing: I only get these errors when I use
STL containers such as map or list.
I know this question is in a gray area between being a
NetView or gcc question, but I've already posted to
the gcc newsgroup with no responses and I'm getting
desparate.
If anyone out there has an idea on how I can resolve
this, I would greatly appreciate it.
TIA,
Bob
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
My recommendation would have to Dennis Ritchie's The C Programming Language. I mean, after all, he wrote the language, what better book to read? Regards, Jennifer Parker NetView for UNIX/NT Level 2 Software Engineer *********************************************************************** Plan Your Migration NOW! End of Support Dates are: NetView V5.0 - May 9, 2001 NetView V5.1.x - Jan 2, 2002 *********************************************************************** Need help with Tivoli Software Products? Ask Tivoli! http://www.tivoli.com/asktivoli
One last item on this and I won't bring it up here again. I am no expert on C, most of the C apps I have written were no longer than 30 or 40 lines of code and all in ANSI C. Does anyone have a suggestion on a good C book... Not C++, but just C, especially if it center on Solaris. Most books I have checked into are for Microsoft C++ or just plain C++, it seams to be hard to find a book center on just C. Thanks Dean -----Original Message----- From: James Shanks [mailto:SHANKS@us.tivoli.com] Sent: Wednesday, August 08, 2001 3:35 PM To: IBM NetView Discussion Subject: RE: [NV-L] NetView development help Not sure I can help Bob, but perhaps I can help Dean. Solaris is very picky about string operations. Basically you have to check each string and make sure it is not null or that you are not using a null pointer or it will core. For the port to Solaris from AIX, NetView development had to replace all the standard string operations with ones that checked the length and pointers first. Hope this helps James Shanks Level 3 Support Tivoli NetView for UNIX and NT Please note that my id has changed. If you need to reply, send to shanks@us.tivoli.com when outside of IBM/Tivoli or to James Shanks/Raleigh/IBM@IBMUS when inside. Dean Sullinger <DSullinger@dot.state.az.us>@tkg.com on 08/08/2001 05:21:47 PM Please respond to IBM NetView Discussion <nv-l@tkg.com> Sent by: owner-nv-l@tkg.com To: "'IBM NetView Discussion'" <nv-l@tkg.com> cc: Subject: RE: [NV-L] NetView development help LOL!!! Sorry Bob, but I have been working on a small app to convert a 32-bit decimal word to an IP address for over a week. I blew the thing together under Windows, but as I am working on it under Solaris, I am having all kinds of problems with basic commands that should work (strcat, strcpy), I keep getting a Coredump... I wonder if this only happens with gcc and not the Sun's C for Solaris. (sorry this is off topic) Dean -----Original Message----- From: Bob Nashus [mailto:bobnashus@yahoo.com] Sent: Wednesday, August 08, 2001 2:11 PM To: nv-l@tkg.com Subject: [NV-L] NetView development help Help! I've written a C++ app that integrates with NetView 5.1 under AIX and Solaris. When I build (with gcc) and run in on AIX 4.2.x, no problems. When I build on Solaris 2.5.1 w/ gcc-2.95.1, I have problems (I've also tried on 2.8 w/ gcc-2.95.3 and I get the same errors). Specifically, I get several warnings during the link phase. I usually don't worry about warnings, however, the app does not work as expected when I run it (it does however work just fine under AIX). Here are the details: I compile and link with: "c++ -DNDEBUG -D_REENTRANT -fpermissive -g -I. I../usr/OV/include -L../usr/OV/lib -L/usr/openwin/lib -L/usr/ucblib -R/usr/OV/lib MyProgram.cpp -lovsnmp -lovw -lov -lnsl -ldl -lkstat -lw -lposix4 -lpthread" Here's an example of the warnings I get: "ld: warning: symbol `bad_exception virtual table' has differing sizes: (file ../usr/OV/lib/libovw.so value=0x18; file /usr/local/lib/gcc-lib/sparc-sun- solaris2.5.1/2.95.1/libgcc.a(exception.o) value=0x20); /usr/local/lib/gcc-lib/sparc-sun- solaris2.5.1/2.95.1/libgcc.a(exception.o) definition taken" One other thing: I only get these errors when I use STL containers such as map or list. I know this question is in a gray area between being a NetView or gcc question, but I've already posted to the gcc newsgroup with no responses and I'm getting desparate. If anyone out there has an idea on how I can resolve this, I would greatly appreciate it. TIA, Bob __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ _________________________________________________________________________ NV-L List information and Archives: http://www.tkg.com/nv-l _________________________________________________________________________ NV-L List information and Archives: http://www.tkg.com/nv-l _________________________________________________________________________ NV-L List information and Archives: http://www.tkg.com/nv-l _________________________________________________________________________ NV-L List information and Archives: http://www.tkg.com/nv-l |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: changing IP NetView for NT 6.02, Jennifer Parker |
|---|---|
| Next by Date: | Dell OpenManage Collections Using Netview, Paul Maine Jr. |
| Previous by Thread: | RE: NetView development help, Scott Barr |
| Next by Thread: | RE: NetView development help, Bob Nashus |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Archive operated by Skills 1st Ltd
See also: The NetView Web