James Shanks wrote:
> I don't know who told you to re-cycle nvcorrd, but that is not really
> necessary, provided all you are trying to do is change a ruleset in
> ESE.automation, and you have no other rulesets running which have action
> nodes in them, which might fail as a result.
> actionsvr loads the rulesets in ESE.automation and when he goes away,
> nvcorrd stops running them and unloads them automatically. So you can do
> the less-disruptive change of just ovstop / ovstart actionsvr. That way
> your user event windows can stay open. Of course, if those are running
> other rulesets which have actions in them, you may lose those actions while
> the actionsvr re-cycle takes place. Some folks do have actions running out
> of event windows or even in their TEC rulesets being run by nvserverd.
>
> I suspect that what you were told was with the best of intentions how not
> to have any unexpected side-effects (such as rulesets in user windows or
> for TEC forwarding with actions in them that might fail) by restarting the
> whole mechanism. But that is not always necessary if you are careful
> about what you are doing.
>
> James Shanks
> Level 3 Support
> Tivoli NetView for UNIX and NT
>
> "Scott Barr" <scott_barr@csgsystems.com>@tkg.com on 08/13/2001 10:17:18 AM
>
> Please respond to IBM NetView Discussion <nv-l@tkg.com>
>
> Sent by: owner-nv-l@tkg.com
>
> To: "IBM NetView Discussion" <nv-l@tkg.com>
> cc:
> Subject: RE: [NV-L] Ruleset Automatic action ??
>
> After recent conversations with support, I was told cycle NVCORRD not just
> actionsvr.
>
> -----Original Message-----
> From: owner-nv-l@tkg.com [mailto:owner-nv-l@tkg.com]On Behalf Of BAUDOUX
> BERNARD
> Sent: Monday, August 13, 2001 8:47 AM
> To: 'IBM NetView Discussion'
> Subject: RE: [NV-L] Ruleset Automatic action ??
>
> Jeff,
>
> restart daemon 'actionsvr', and you can see if your new ruleset has been
> successfully registered in /usr/OV/log/nvaction.alog
>
> Regards,
> Bernard Baudoux
> Phone: +32 (0)2/565.24.68
> e-mail : bernard.baudoux@fortisbank.com
>
> > -----Original Message-----
> > From: Jeff Fitzwater [SMTP:jfitz@Princeton.EDU]
> > Sent: Monday, 13 August, 2001 15:42
> > To: netview users
> > Subject: [NV-L] Ruleset Automatic action ??
> >
> > Solaris 7
> > Netview 6.02
> >
> >
> > If I have a Ruleset defined in the "ESE.automation" file, and I make a
> > change to that ruleset, what process
> > should I restart to have the changes take effect?
> >
> >
> > Thank you;
> >
> > Jeff Fitzwater
> > CIT Systems & networking
> > Princeton University
> >
> > _________________________________________________________________________
> > NV-L List information and Archives: http://www.tkg.com/nv-l
>
> This email and any attached files are confidential and may be legally
> privileged.
> If you are not the intended recipient, any disclosure, reproduction,
> copying, distribution, or other dissemination or use of this communication
> is strictly prohibited.
> If you have received this transmission in error please notify the sender
> immediately and then delete this email.
> Email transmission cannot be guaranteed to be secure or error free as
> information could be intercepted, corrupted, lost, destroyed, arrive late
> or
> incomplete, or contain viruses.
> The sender therefore is in no way liable for any errors or omissions in the
> content of this message, which may arise as a result of email transmission.
> If verification is required, please request a hard copy.
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
Thanks all for their help and James for the detailed info.
|