Rick,
Bay/Nortel routers often have the problem that the ipAdEntIfIndex
in the interface table points to a non existing interface.
If the Router is SNMP status polled this will be a problem for netmon.
Check this:
snmpwalk BayRouter ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex
snmpwalk BayRouter interfaces.ifTable.ifEntry.ifIndex
Kind regards
Oliver Bruchhaeuser
Leslie
Clark/Southfield To: NV-L@tkg.com
/IBM@IBMUS cc:
Sent by: Subject: [NV-L] Re: Netview 6
owner-nv-l@tkg.c
om
29.08.2001 04:47
Please respond
to IBM NetView
Discussion
I don't know why the status is not showing correctly. If you ping it
does it come green? That would be a false alarm, adjusted
by tuning the timeouts. Tell us all more about it, and someone
will probably have a suggestion. You might try reposting the
append you found, if you think it is the same problem.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
"Rick Yetter
II" To: Leslie
Clark/Southfield/IBM@IBMUS
<ryetter_ii@ho cc:
tmail.com> Subject: Re: Netview 6
08/28/01 06:20
PM
Thank you for the quick response, I wrote directly to you because I was
going through a thread on the list service with my exact problem, but there
was no resolution to it. It was a thread titled "Cisco Links." The
platform I am on is AIX 4.3.3 and Netview 6.0.2. The serial interfaces are
numbered and we are not using the circuitless IP feature. All ifType are
the same (Point to Point Serial (22).
----- Original Message -----
From: "Leslie Clark" <lclark@us.ibm.com>
To: <NV-L@tkg.com>
Cc: <ryetter_ii@hotmail.com>
Sent: Tuesday, August 28, 2001 3:13 PM
Subject: Re: Netview 6
> Rick, if you don't subscribe to the public listserver for Neview, you
> ought to sign up. Find out more about it at www.tkg.com/nv-l. It is
> more helpful to everyone to participate in these discussions
> there as opposed to one-on-one.
>
> Now, what platform are you on, and what version? And are
> your point-to-point serials numbered, or unnumbered? Are you
> using that circuitless IP feature of Bay devices?
>
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
> Detroit
>
>
>
>
> "Rick Yetter
> II" To: Leslie
Clark/Southfield/IBM@IBMUS
> <ryetter_ii@ho cc:
> tmail.com> Subject: Netview 6
>
> 08/28/01 03:20
> PM
>
>
>
>
>
> Leslie,
>
> I have a question about netview that hopefully you can help me with. I'm
> monitoring all Bay networks network and on the routers that have a point
to
> point serial interface, the icon on the map is Red and the status of the
> device shows down from a netview standpoint. The device is actually
> working properly. Is there any way I can get netview to show the correct
> status?
>
> TIA,
>
> Rick Yetter II
>
>
>
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|