NetView = 6.0.2
AIX = 4.3.3
I have installed MLM on my NetView box so that I can use Agent Policy
Manager to monitor Frame relay circuit state changes.
I cannot configure the MLM. Error indicates that all variables are
reeadOnly. Upon further investigation. I cannot even set the systemContact.
I have verified the /etc/snmpd.conf file
community spock
community mccoy 127.0.0.1 255.255.255.255 readWrite
community mccoy 10.0.180.19 255.255.255.255 readWrite
community mccoy farpoint 255.255.255.255 readWrite
NV Server = farpoint
IP Addr = 10.0.180.19
Below is the output from the snmpd.log file
Does anyone have any suggestions ?
Thanks,
Don
=================================
10/15/01 09:53:00 TRACE:
{
version 0,
community "mccoy",
data {
get-response {
request-id 9866,
error-status 4,
error-index 1,
variable-bindings {
VarBind {
name sysContact.0,
value {
string "Don Davis"
}
}
}
}
}
}
10/15/01 09:53:00 DEBUG: sending 52 bytes to 10.0.180.19
10/15/01 09:53:00 PDUS:
30 32 02 01 00 04 08 62 65 6c 61 79 69 6e 67 a2
23 02 02 26 8a 02 01 04 02 01 01 30 17 30 15 06
08 2b 06 01 02 01 01 04 00 04 09 44 6f 6e 20 44
61 76 69 73
=======================
Donald Davis
First Citizens Bank
Systems Engineer Consultant
Enterprise Management
100 East Tryon Road
Raleigh, NC. 27603-3526
919-716-8448
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are
intended solely for the use of individual or entity to whom they are addressed.
If you are not the intended recipient or the person responsible for delivering
the electronic mail to the intended recipient, be advised that you have
received this electronic mail in error and that any use, dissemination,
forwarding, printing, or copying of this electronic mail is strictly
prohibited. If you have received this electronic mail in error, please
immediately notify the sender by return mail.
|