However - as I was just reminded in an earlier post - you cannot collect
valid data for gig interfaces because of the use of 64 bit counters and
NetView's inability to handle this. Unless someone corrects me, you can't
monitor bandwidth utilization for any devices that use 64 bit counters.
Allie
"Enriquez
Bolio,C-Raul,MEXICO,I To: "'Netview List'"
<nv-l@tkg.com>
NFO" cc: (bcc: Allie M
Tate/allie/LSU)
<C-Raul.Enriquez@MX.N Subject: RV: [NV-L] NV_L
What should I use Netview or Cisco Works ? both
ESTLE.com>
Sent by:
owner-nv-l@tkg.com
10/26/2001 08:54 AM
Please respond to IBM
NetView Discussion
Hello Christian:
Currently I'm using Netview for monitoring bandwidth and it works OK. You
only have to collect IfInOctects and IfOutOctects information and create an
expression to get the %.
Saludos.
> -----Mensaje original-----
> De: chuberdeau@avdl.com [SMTP:chuberdeau@avdl.com]
> Enviado el: Viernes 26 de Octubre de 2001 9:26 AM
> Para: IBM NetView Discussion
> Asunto: Re: [NV-L] NV_L What should I use Netview or Cisco Works ?
> both
>
> We do use mrtg for historique but can we configure mrtg to send snmp
trap.
> I dont think so.
>
> So I do have both system. but the version of Cisco Works I have does not
> include monitoring.
>
> Does anybody use netview for monitoring bandwidth or cpu ?
>
> Thanks
>
> Christian
>
>
>
>
>
>
> "Gavin Newman" <NEWMANGJ@banksa.com.au>@tkg.com le 2001-10-25 20:19:18
>
> Veuillez répondre à IBM NetView Discussion <nv-l@tkg.com>
>
> Envoyé par : owner-nv-l@tkg.com
>
>
> Pour : <nv-l@tkg.com>
> cc :
>
> Objet : Re: [NV-L] NV_L What should I use Netview or Cisco Works ?
> both
>
>
> Have you considered MRTG for your bandwidth monitoring?
>
> >>> chuberdeau@avdl.com 25/10/2001 03:34:52 >>>
> Hi Everybody,
>
> I have to do monitoring of cisco's equipment and telecommunication
> line bandwidth.
>
> Can I do it only with netview or should I purchase cisco works
> "CWLMS-2.0".
>
> That what I already saw or understand is if something failed on the cisco
> router
> for example one power supply it will send a snmp trap to my console and
> the
> mib
> allow me to interpret the message.
>
> About bandwidth monitoring or CPU I think I have to do a collection and
> set
> some threshold.
>
> Can someone tell me if I m wrong ... or on the wrong track...
>
> Thank you very much
>
> Christian Huberdeau
> Management Tools
>
>
>
>
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
>
> **********************************************************************
> ***** IMPORTANT INFORMATION *****
> This document should be read only by those persons to whom
> it is addressed and its content is not intended for use by
> any other persons. If you have received this message in
> error, please notify us immediately. Please also destroy and
> delete the message from your computer. Any unauthorised form
> of reproduction of this message is strictly prohibited.
> Bank SA is not liable for the proper and complete transmission
> of the information contained in this communication, nor for any
> delay in its receipt.
> **********************************************************************
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|